Toyota KUN26L-P series Owner'S Manual Download

Page: 110 / 271

NOTICE

Be careful not to over

−

rev the en-

gine. Watch the tachometer to keep

engine rpm from going into the red

zone. The approximate maximum al-

lowable speed for each position is

given below for your reference:

km/h (mph)

Transfer

“H2” or “H4”

“L4”

“2”

104 (65)

41 (25)

. . . . .

“L”

57 (35)

22 (14)

. . . . . . .

Do not continue hill climbing or

hard towing for a long time in the

“2” or “L” position. This may cause

severe automatic transmission dam-

age from overheating. To prevent

such damage, “D” or “3” position

should be used in hill climbing or

hard towing.

(e) Backing up

1. Bring the vehicle to a complete stop.
2. With the brake pedal held down with

your foot, shift the selector lever to the

“R” position.

NOTICE

Never shift into reverse while the ve-

hicle is moving.

(f) Parking

1. Bring the vehicle to a complete stop.
2. Pull the parking brake lever fully to

securely apply the parking brake.

3. With the brake pedal pressed down,

shift the selector lever to the “P” posi-

tion.

CAUTION

Never attempt to move the selector

lever into “P” position under any cir-

cumstances while the vehicle is mov-

ing. Serious mechanical damage and

loss of vehicle control may result.

(g) Good driving practice

If the transmission repeatedly shifts up

and down between third gear and over-

drive when climbing a gentle slope,

shift the selector lever to the “3” posi-

tion. Be sure to shift the selector lever

to the “D” position immediately after-

ward.

When towing a trailer, in order to main-

tain engine braking efficiency, do not

use ”D” position. The selector lever

must be in the “3” position.

CAUTION

Always keep your foot on the brake

pedal while stopped with the engine

running. This prevents the vehicle

from creeping.

NOTICE

Always use the brake pedal or the

parking brake to hold the vehicle on

an upgrade. Do not attempt to hold

the vehicle using the accelerator ped-

al, as this can cause the transmission

to overheat.

HILUX (Argentina) OM99908E

04/10/06

Summary of Contents for KUN26L-P series
















































































































































































































































































Search results

Summary of Contents for KUN26L-P series

Reviews:

Related manuals for KUN26L-P series

Brands by name

Popular brands

Toyota KUN26L-P series, Owner'S Manual

Search results

Summary of Contents for KUN26L-P series

Reviews:

Related manuals for KUN26L-P series

Brands by name

Popular brands