Toyota KUN26L-P series Owner'S Manual Download

Page: 55 / 271

Be careful not to damage the belt

webbing or hardware. Take care that

they do not get caught or pinched

in the seat or doors.

Inspect the belt system periodically.

Check for cuts, fraying, and loose

parts. Damaged parts should be re-

placed. Do not disassemble or

modify the system.

Keep the belts clean and dry. If

they need cleaning, use a mild soap

solution or lukewarm water. Never

use bleach, dye, or abrasive clean-

ers, or allow them to come into

contact with the belt—they may se-

verely

weaken

the

belts.

(See

“Cleaning the interior” on page

205.)

Replace the belt assembly (includ-

ing bolts) if it has been used in a

severe impact. The entire assembly

should be replaced even if damage

is not obvious.

13h055

Tab

Buckle

Adjust the seat as needed (front seats

only) and sit up straight and well back

in the seat. To fasten your belt, pull it

out of the retractor and insert the tab

into the buckle.

You will hear a click when the tab locks

into the buckle.
The seat belt length automatically adjusts

to your size and the seat position.
The retractor will lock the belt during a

sudden stop or on impact. It also may

lock if you lean forward too quickly. A

slow, easy motion will allow the belt to

extend, and you can move around freely.

If the seat belt cannot be pulled out of the

retractor, firmly pull the belt and release

it. You will then be able to smoothly pull

the belt out of the retractor.

CAUTION

After inserting the tab, make sure

the tab and buckle are locked and

that the belt is not twisted.

Do not insert coins, clips, etc. in

the buckle as this may prevent you

from properly latching the tab and

buckle.

If the seat belt does not function

normally, immediately contact your

Toyota dealer. Do not use the seat

until the seat belt is fixed, because

it cannot protect an adult occupant

or your child from death or serious

injury.

HILUX (Argentina) OM99908E

04/10/06

—Fastening 3

−

point type

seat belts

Summary of Contents for KUN26L-P series
















































































































































































































































































Search results

Summary of Contents for KUN26L-P series

Reviews:

Related manuals for KUN26L-P series

Brands by name

Popular brands

Toyota KUN26L-P series, Owner'S Manual

Search results

Summary of Contents for KUN26L-P series

Reviews:

Related manuals for KUN26L-P series

Brands by name

Popular brands