Toyota KUN26L-P series Page 205 Owner'S Manual Download

Page: 205 / 271

198

Before emergency towing, check that

the eyelet is not broken or damage and

that the installation bolts are not loose.

Fasten the towing cable or chain se-

curely to the eyelet.

Do not jerk the eyelet. Apply steady

and even force.

To avoid damaging the eyelet, do not

pull from the side or at a vertical

angle. Always pull straight ahead.

CAUTION

If the emergency towing eyelet is

used to get out when your vehicle

becomes struck in mud, sand or oth-

er condition from which the vehicle

cannot be driven out under its own

power, make sure to observe the pre-

cautions mentioned below. Otherwise,

excessive stress will be put on the

eyelet and the towing cable or chain

may break, causing serious injury or

damage.

If the towing vehicle can hardly

move, do not forcibly continue the

towing. Contact your Toyota dealer

or a commercial tow truck service

for assistance.

Tow the vehicle as straight ahead

as possible.

Keep away from the vehicle during

towing.

The following methods are effective to

use when your vehicle is stuck in the

mud, sand or other condition from

which the vehicle cannot be driven out

under its own power. Use extreme cau-

tion when towing the vehicle. In addi-

tion, keep away from the vehicles and

towing cable or chain when towing.

Remove the sand and soil in the front

and the back of the tires.

Place stones or wood under the tires.

HILUX (Argentina) OM99908E

04/10/06

—Emergency

towing

eyelet

precautions

—Tips for towing a stuck

vehicle

Summary of Contents for KUN26L-P series
















































































































































































































































































Search results

Summary of Contents for KUN26L-P series

Reviews:

Related manuals for KUN26L-P series

Brands by name

Popular brands

Toyota KUN26L-P series, Owner'S Manual

Search results

Summary of Contents for KUN26L-P series

Reviews:

Related manuals for KUN26L-P series

Brands by name

Popular brands