Toyota COROLLA CROSS HYBRID 2020 Owner'S Manual Download Page 141

Page: 141 / 456

139

3-3. Adjusting the seats

Before driving

COROLLA CROSS HYBRID_Kouzui_GE

■

Front seats

Pull the head restraints up.

Down

Push the head restraint down while
pressing the lock release button

■

Rear outside seats

Pull the head restraints up.

Down

Push the head restraint down while
pressing the lock release button

■

Rear center seat

Pull the head restraints up.

Down

Push the head restraint down while
pressing the lock release button

■

Adjusting the height of the head

restraints (front seats)

Make sure that the head restraints are

adjusted so that the center of the head

restraint is closest to the top of your

ears.

Head restraints

Head restraints are provided
for all seats.

WARNING

■

Head restraint precautions

Observe the following precautions

regarding the head restraints. Failure

to do so may result in death or serious

injury.

●

Use the head restraints designed

for each respective seat.

●

Adjust the head restraints to the

correct position at all times.

●

After adjusting the head restraints,

push down on them and make sure

they are locked in position.

●

Do not drive with the head

restraints removed.

Adjusting a head restraint

COROLLA CROSS HYBRID_OM_General_OM16537E

Summary of Contents for COROLLA CROSS HYBRID 2020









































































































































































































































































































































































































































































Search results

Summary of Contents for COROLLA CROSS HYBRID 2020

Reviews:

Related manuals for COROLLA CROSS HYBRID 2020

Brands by name

Popular brands

Toyota COROLLA CROSS HYBRID 2020, Owner'S Manual

Search results

Summary of Contents for COROLLA CROSS HYBRID 2020

Reviews:

Related manuals for COROLLA CROSS HYBRID 2020

Brands by name

Popular brands