Toyota COROLLA CROSS HYBRID 2020 Owner'S Manual Download Page 140

Page: 140 / 456

138

3-3. Adjusting the seats

COROLLA CROSS HYBRID_Kouzui_GE

Stow the rear armrest. (



P.316)

Stow the rear center seat belt
buckle.

Lower the head restraints to the
lowest position. (



P.139)

Fold the seatback down while
pulling the seatback angle
adjustment lever

Each seatback may be folded sepa-

rately.

WARNING

Observe the following precautions.

Failure to do so may result in death or

serious injury.

■

When folding the rear seatbacks

down

●

Do not fold the seatbacks down

while driving.

●

Stop the vehicle on level ground,

set the parking brake and shift the

shift lever to P.

●

Do not allow anyone to sit on a

folded seatback or in the luggage

compartment while driving.

●

Do not allow children to enter the

luggage compartment.

●

Do not operate the rear seat if it is

occupied.

●

Be careful not to get feet or hands

caught in the moving parts or joints

of the seats during operation.

●

Adjust the position of the front seats

before folding down the rear

seatbacks so that the front seats do

not interfere with the rear seatbacks

when folding down the rear

seatbacks.

●

Do not allow children to operate the

seat.

■

After returning the rear seatback

to the upright position

●

Make sure that the seatback is

securely locked in position by lightly

pushing it back and forth.

●

Check that the seat belts are not

twisted or caught in the seatback.

If the seat belt gets caught between

the seatback’s securing hook and

latch, it may damage the seat belt.

COROLLA CROSS HYBRID_OM_General_OM16537E

Summary of Contents for COROLLA CROSS HYBRID 2020









































































































































































































































































































































































































































































Search results

Summary of Contents for COROLLA CROSS HYBRID 2020

Reviews:

Related manuals for COROLLA CROSS HYBRID 2020

Brands by name

Popular brands

Toyota COROLLA CROSS HYBRID 2020, Owner'S Manual

Search results

Summary of Contents for COROLLA CROSS HYBRID 2020

Reviews:

Related manuals for COROLLA CROSS HYBRID 2020

Brands by name

Popular brands