manualshive.com logo in svg

Toyota COROLLA CROSS HYBRID 2020, Owner'S Manual

The Toyota COROLLA CROSS HYBRID 2020 Owner's Manual is an essential guide for every owner. Easily downloadable and completely free, this comprehensive manual provides detailed information on the vehicle's features, maintenance, and troubleshooting. Download it now from manualshive.com to maximize your driving experience.

Share
Download
background image

450

Alphabetical Index

COROLLA CROSS HYBRID_Kouzui_GE

Toyota Safety Sense

Automatic High Beam ................ 174
Dynamic radar cruise control ..... 209
LTA (Lane Tracing Assist) .......... 200
PCS (Pre-Collision System)....... 192

Traction battery (hybrid battery)

Hybrid battery (traction battery) air 

vents .......................................... 69

Location ....................................... 67
Specification............................... 420
Warning message ........................ 70

Traction Control (TRC)................. 240
Traction motor (electric motor) ..... 64
Trailer towing ................................ 161
Transmission

Driving mode select switch ........ 238
Hybrid transmission ................... 168
If the shift lever cannot be shifted 

from P ...................................... 169

TRC (Traction Control)................. 240
Trip meters ................................ 84, 90
Turn signal lights

Replacing light bulbs.................. 362
Turn signal lever ........................ 170
Wattage...................................... 425

U

USB charging port........................ 314
USB port........................................ 256

V

Vanity lights .................................. 315

Wattage...................................... 425

Vanity mirrors ............................... 315
Vehicle data recording ..................... 7
Vehicle identification number...... 418
Vehicle information display........... 97
Vehicle Stability Control (VSC).... 239
VSC (Vehicle Stability Control).... 239

W

Warning buzzers

ABS ............................................380
Airbags .......................................379
Approach warning ......................215
Brake Override System ..............380
Brake system .............................378
Charging system ........................379
Drive-Start Control .....................380
Electric power steering...............380
Engine ........................................379
High coolant temperature...........378
Hybrid system ............................379
Hybrid system overheat .............379
Low engine oil pressure .............379
LTA (Lane Tracing Assist)...200, 382
Open door .......................... 112, 114
Open window .............................147
RCTA (Rear Cross Traffic Alert) .383
Seat belt .............................381, 382
Toyota parking assist-sensor....232, 

383

Warning label ..................................67
Warning lights...............................378

ABS ............................................380
Brake Override System ..............380
Brake system .............................378
Charging system ........................379
Drive-Start Control .....................380
Electric power steering...............380
High coolant temperature...........378
Hybrid system overheat .............379
Low engine oil pressure .............379
Low fuel level .............................381
LTA indicator...............................382
Malfunction indicator lamp .........379
Parking brake indicator ..............384
Pre-collision system ...................383
RCTA OFF indicator ...................383
Seat belt reminder light ......381, 382
Slip indicator...............................384
SRS............................................379
Tire pressure ..............................382

COROLLA CROSS HYBRID_OM_General_OM16537E

Summary of Contents for COROLLA CROSS HYBRID 2020









































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for COROLLA CROSS HYBRID 2020

RACLET SAFARI Setup And Maintenance Manual preview
SAFARI
Brand: RACLET Pages: 48
RACLET Allegra Manual preview
Allegra
Brand: RACLET Pages: 31
Yakima SkyBox 12 Installation Instructions Manual preview
SkyBox 12
Brand: Yakima Pages: 6
Yakima HoldUp Plus2 Manual preview
HoldUp Plus2
Brand: Yakima Pages: 18
Chevrolet Avalanche 2005 Owner'S Manual preview
Avalanche 2005
Brand: Chevrolet Pages: 494
Bestop WrapAround Windjammer Installation Instructions Manual preview
WrapAround Windjammer
Brand: Bestop Pages: 7
Waeco MagicComfort MSH200 Installation And Operating Instructions Manual preview
MagicComfort MSH200
Brand: Waeco Pages: 108
Tusk RL-HM018R Installation Instructions And Information Manual preview
RL-HM018R
Brand: Tusk Pages: 2
SAN HIMA SH-TENT-SY20 User Manual preview
SH-TENT-SY20
Brand: SAN HIMA Pages: 7
Paccar Peterbilt SmartAir Operator'S Manual preview
Peterbilt SmartAir
Brand: Paccar Pages: 58
Mercedes-Benz 300 SL Operator'S Manual preview
300 SL
Brand: Mercedes-Benz Pages: 153
Honda 2010 Pilot Technology Reference Manual preview
2010 Pilot
Brand: Honda Pages: 20
Kia 2009 Rio Series Owner'S Manual preview
2009 Rio Series
Brand: Kia Pages: 219
RBO RBO4038 Product Manual preview
RBO4038
Brand: RBO Pages: 15
Cadillac 2003 Seville Owner'S Manual preview
2003 Seville
Brand: Cadillac Pages: 402
Cobra BAK R294 Manual preview
BAK R294
Brand: Cobra Pages: 2
ROLEC WallPod Series Installation Instructions preview
WallPod Series
Brand: ROLEC Pages: 2
Kargo Master 80070 Instruction Manual preview
80070
Brand: Kargo Master Pages: 17

Brands by name

Popular brands

Load more brands