manualshive.com logo in svg

Toyota COROLLA CROSS HYBRID 2020, Owner'S Manual

The Toyota COROLLA CROSS HYBRID 2020 Owner's Manual is an essential guide for every owner. Easily downloadable and completely free, this comprehensive manual provides detailed information on the vehicle's features, maintenance, and troubleshooting. Download it now from manualshive.com to maximize your driving experience.

Share
Download
background image

448

Alphabetical Index

COROLLA CROSS HYBRID_Kouzui_GE

Rear view mirror

Inside rear view mirror ............... 143
Outside rear view mirrors........... 144

Rear window defogger................. 301
Rear window wiper....................... 181
Refueling

Capacity ..................................... 420
Fuel types .................................. 420
Opening the fuel tank cap .......... 183

Regenerative braking..................... 65
Replacing

Electronic key battery................. 358
Fuses ......................................... 360
Light bulbs.................................. 362
Tires ........................................... 399

S

Seat belt reminder light........ 381, 382
Seat belts ........................................ 25

Child restraint system installation 40
Cleaning and maintaining the seat 

belt........................................... 321

Emergency Locking Retractor...... 26
How to wear your seat belt .......... 26
How your child should wear the seat 

belt............................................. 26

Pregnant women, proper seat belt 

use............................................. 25

Reminder light and buzzer . 381, 382
Seat belt pretensioners ................ 27
SRS warning light ...................... 379

Seats

Adjustment ......................... 136, 137
Adjustment precautions ............. 136
Child seats/child restraint system 

installation.................................. 40

Cleaning..................................... 321
Head restraints........................... 139
Properly sitting in the seat............ 23

Secondary Collision Brake.......... 240
Sensor

Automatic headlight system ....... 172
Automatic High Beam system.... 174
BSM (Blind Spot Monitor) .......... 221

Inside rear view mirror................144
LTA (Lane Tracing Assist)...........200
Radar sensor......................185, 223
Rain-sensing windshield wipers .180
RCTA..........................................235
Toyota parking assist-sensor......227

Service plug ....................................67
Shift lever

Hybrid transmission....................168
If the shift lever cannot be shifted 

from P ......................................169

Shift lock system ..........................169
Shopping bag hooks ....................312
Side airbags ....................................29
Side doors

Door lock .................................... 111

Side mirrors

Adjustment .................................144
BSM (Blind Spot Monitor)...........221
Folding .......................................145
RCTA function ............................234

Side turn signal lights

Replacing light bulbs ..................362
Turn signal lever.........................170

Side windows ................................146
Smart entry & start system

Antenna location ........................127
Entry functions ................... 111, 117
Starting the hybrid system..........162

Snow tires......................................247
Spare tire .......................................399

Inflation pressure........................424
Storage location .........................399

Spark plug .....................................422
Specifications ...............................418
Speedometer.............................82, 87
Steering lock

Column lock release...................162
Steering lock system warning mes-

sage .........................................162

Steering wheel

Adjustment .................................142
Meter control switches .................93

Stop lights

Replacing light bulbs ..................362

COROLLA CROSS HYBRID_OM_General_OM16537E

Summary of Contents for COROLLA CROSS HYBRID 2020









































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for COROLLA CROSS HYBRID 2020

Samsung HF1000 User Manual preview
HF1000
Brand: Samsung Pages: 133
ULTIMATE SPEED CARBON Assembly And Safety Advice preview
CARBON
Brand: ULTIMATE SPEED Pages: 19
cam HS Series Operating Manual preview
HS Series
Brand: cam Pages: 28
Ecco EW4010 Installation And Operation Instructions Manual preview
EW4010
Brand: Ecco Pages: 9
Ecco EW4009 Installation And Operation Instructions Manual preview
EW4009
Brand: Ecco Pages: 9
TATA Motors Indigo Owner'S Manual & Service Book preview
Indigo
Brand: TATA Motors Pages: 164
Parrot CK3300 Setup Information Manual preview
CK3300
Brand: Parrot Pages: 19
Parrot Minikit+ Quick Start Manual preview
Minikit+
Brand: Parrot Pages: 88
Parrot Minikit+ Information Sheet preview
Minikit+
Brand: Parrot Pages: 2
Parrot CK3100 LCD Specifications preview
CK3100 LCD
Brand: Parrot Pages: 2
Parrot CK 3000 Evolution Installation Notes preview
CK 3000 Evolution
Brand: Parrot Pages: 8
Parrot CK 3000 Evolution User Manual preview
CK 3000 Evolution
Brand: Parrot Pages: 106
Neuspeed 25.02.22.2 Installation Instructions preview
25.02.22.2
Brand: Neuspeed Pages: 2
FORM FIT 1303 Installation Instructions preview
1303
Brand: FORM FIT Pages: 2
Tessera4x4 SOT-1311 ROLL Installation Manual preview
SOT-1311 ROLL
Brand: Tessera4x4 Pages: 20
Actia TGU-R ACCESS User Manual preview
TGU-R ACCESS
Brand: Actia Pages: 37
Yescom YES5062 User Manual preview
YES5062
Brand: Yescom Pages: 4
Z Automotive Tazer DT User Manual preview
Tazer DT
Brand: Z Automotive Pages: 16

Brands by name

Popular brands

Load more brands