Toyota COROLLA CROSS HYBRID 2020 Owner'S Manual Download Page 309

Page: 309 / 456

307

6-2. Using the interior lights

Interior features

COROLLA CROSS HYBRID_Kouzui_GE

position is on, the lights turn on.

Turns the lights on/off

■

Rear (vehicles without a moon
roof)

Turns the light off

Turns the door position on

When a door is opened while the door
position is on, the lights turn on.

Turns the light on

■

Front



Vehicles without a moon roof

Turns the lights on/off



Vehicles with a moon roof

Turns the lights on/off

■

Rear (vehicles with a moon
roof)

Turns the lights on/off

■

Illuminated entry system

The lights automatically turn on/off

according to the power switch mode, the

presence of the electronic key, whether

the doors are locked/unlocked, and

whether the doors are opened/closed.

■

To prevent the 12-volt battery from

being discharged

If the interior lights remain on when the

power switch is turned off, the lights will

go off automatically after 20 minutes.

■

The interior lights may turn on

automatically when

If any of the SRS airbags deploy (inflate)

or in the event of a strong rear impact,

the interior lights will turn on automati-

cally.

The interior lights will turn off automati-

cally after approximately 20 minutes.

Operating the personal
lights

COROLLA CROSS HYBRID_OM_General_OM16537E

Summary of Contents for COROLLA CROSS HYBRID 2020









































































































































































































































































































































































































































































Search results

Summary of Contents for COROLLA CROSS HYBRID 2020

Reviews:

Related manuals for COROLLA CROSS HYBRID 2020

Brands by name

Popular brands

Toyota COROLLA CROSS HYBRID 2020, Owner'S Manual

Search results

Summary of Contents for COROLLA CROSS HYBRID 2020

Reviews:

Related manuals for COROLLA CROSS HYBRID 2020

Brands by name

Popular brands