manualshive.com logo in svg

Toyota COROLLA CROSS HYBRID 2020, Owner'S Manual, Page: 50 / 456

Share
Download
Toyota COROLLA CROSS HYBRID 2020 Owner'S Manual Download Page 50

48

1-2. Child safety

COROLLA CROSS HYBRID_Kouzui_GE

*2

: If the head restraint interferes with 

your child restraint system, and the 
head restraint can be removed, 

remove the head restraint.
Otherwise, put the head restraint in 
the upper most position.

*3

: Not suitable for child restraint sys-

tems with support leg.

■

Detail information for child restraint systems installation

ISOFIX child restraint systems are divided into different “fixture”. The child 
restraint system can be used in the seating positions for “fixture” mentioned 
in the table above. For kind of “fixture” relation, confirm the following table.
If your child restraint system has no kind of “fixture” (or if you cannot find 
information in the table below), please refer to the child restraint system 
“vehicle list” for compatibility information or ask the retailer of your child 
seat.

Seating position

Seat position number

Seating position suitable for 

universal belted (Yes/No)

Yes

Yes

Yes

i-Size seating position 

(Yes/No)

Yes

No

Yes

Seating position suitable for 

lateral fixture (L1/L2/No)

No

No

No

Suitable rearward facing fixture 

(R1/R2X/R2/R3/No)

R1, R2X, R2

No

R1, R2X, R2

Suitable forward facing fixture 

(F2X/F2/F3/No)

F2X, F2, F3

No

F2X, F2, F3

Suitable junior seat fixture 

(B2/B3/No)

B2, B3

No

B2, B3

COROLLA CROSS HYBRID_OM_General_OM16537E

Summary of Contents for COROLLA CROSS HYBRID 2020









































































































































































































































































































































































































































































Reviews:

No comments