Toyota COROLLA CROSS HYBRID 2020 Owner'S Manual Download Page 119

Page: 119 / 456

117

3-2. Opening, closing and locking the doors

Before driving

COROLLA CROSS HYBRID_Kouzui_GE

■

Smart entry & start system

Carry the electronic key to enable
this function.

Unlocks all the doors

The doors cannot be unlocked for 3
seconds after the doors are locked.

Locks all the doors

Check that the door is securely locked.

■

Wireless remote control



P.111

■

Luggage compartment light

●

The luggage compartment light turns

on when the back door is opened.

●

If the luggage compartment light is left

on when the power switch is turned

off, the light will go off automatically

after 20 minutes.

■

Operation signals



P.112

■

Door lock switches



P.113

■

Opening the back door

Raise the back door while pushing
up the back door opener switch.

■

Closing the back door

Lower the back door using a back

WARNING

●

Do not pull on the back door

damper stay (vehicles without a

power back door) (



P.118) or back

door spindle (vehicles with a power

back door) (



P.124) to close the

back door, and do not hang on the

back door damper stay (vehicles

without a power back door) or back

door spindle (vehicles with a power

back door).

Doing so may cause hands to be

caught or the back door damper stay

(vehicles without a power back door)

or back door spindle (vehicles with a

power back door) to break, causing

an accident.

●

If a heavy object is attached to the

back door, it may suddenly shut

again after being opened, causing

someone’s hands, arms, head or

neck to be caught and injured. Do

not attach any accessories other

than genuine Toyota parts to the

back door.

Unlocking and locking the
back door from the outside

Unlocking and locking the
back door from the inside

Opening/closing the back
door (vehicles without a
power back door)

COROLLA CROSS HYBRID_OM_General_OM16537E

Summary of Contents for COROLLA CROSS HYBRID 2020









































































































































































































































































































































































































































































Search results

Summary of Contents for COROLLA CROSS HYBRID 2020

Reviews:

Related manuals for COROLLA CROSS HYBRID 2020

Brands by name

Popular brands

Toyota COROLLA CROSS HYBRID 2020, Owner'S Manual

Search results

Summary of Contents for COROLLA CROSS HYBRID 2020

Reviews:

Related manuals for COROLLA CROSS HYBRID 2020

Brands by name

Popular brands