Toyota COROLLA CROSS HYBRID 2020 Owner'S Manual Download Page 203

Page: 203 / 456

201

4-5. Using the driving support systems

Driving

COROLLA CROSS HYBRID_Kouzui_GE

WARNING

●

When the tires have been exces-

sively worn, or when the tire infla-

tion pressure is low.

●

During emergency towing.

■

Preventing LTA system malfunc-

tions and operations performed

by mistake

●

Do not modify the headlights or

place stickers, etc. on the surface of

the lights.

●

Do not modify the suspension etc. If

the suspension etc. needs to be

replaced, contact your Toyota

dealer.

●

Do not install or place anything on

the hood or grille. Also, do not

install a grille guard (bull bars, kan-

garoo bar, etc.).

●

If your windshield needs repairs,

contact your Toyota dealer.

■

Conditions in which functions

may not operate properly

In the following situations, the func-

tions may not operate properly and

the vehicle may depart from its lane.

Drive safely by always paying careful

attention to your surroundings and

operate the steering wheel to correct

the path of the vehicle without relying

solely on the functions.

●

When the follow-up cruising dis-

play is displayed (



P.205) and the

preceding vehicle changes lanes.

(Your vehicle may follow the

preceding vehicle and also change

lanes.)

●

When the follow-up cruising dis-

play is displayed (



P.205) and the

preceding vehicle is swaying. (Your

vehicle may sway accordingly and

depart from the lane.)

●

When the follow-up cruising dis-

play is displayed (



P.205) and the

preceding vehicle departs from its

lane. (Your vehicle may follow the

preceding vehicle and depart from

the lane.)

●

When the follow-up cruising dis-

play is displayed (



P.205) and the

preceding vehicle is being driven

extremely close to the left/right lane

line. (Your vehicle may follow the

preceding vehicle and depart from

the lane.)

●

Vehicle is being driven around a

sharp curve.

●

Objects or patterns that could be

mistaken for white (yellow) lines are

present on the side of the road

(guardrails, reflective poles, etc.).

COROLLA CROSS HYBRID_OM_General_OM16537E

Summary of Contents for COROLLA CROSS HYBRID 2020









































































































































































































































































































































































































































































Search results

Summary of Contents for COROLLA CROSS HYBRID 2020

Reviews:

Related manuals for COROLLA CROSS HYBRID 2020

Brands by name

Popular brands

Toyota COROLLA CROSS HYBRID 2020, Owner'S Manual

Search results

Summary of Contents for COROLLA CROSS HYBRID 2020

Reviews:

Related manuals for COROLLA CROSS HYBRID 2020

Brands by name

Popular brands