manualshive.com logo in svg

Toyota COROLLA CROSS HYBRID 2020, Owner'S Manual

The Toyota COROLLA CROSS HYBRID 2020 Owner's Manual is an essential guide for every owner. Easily downloadable and completely free, this comprehensive manual provides detailed information on the vehicle's features, maintenance, and troubleshooting. Download it now from manualshive.com to maximize your driving experience.

Share
Download
background image

445

Alphabetical Index

COROLLA CROSS HYBRID_Kouzui_GE

Horn ............................................... 142
Hybrid battery (traction battery)

Location ....................................... 67
Specification............................... 420
Warning message ........................ 70

Hybrid battery (traction battery) air 

intake vent .................................. 354

Hybrid battery (traction battery) air 

vents.............................................. 69

Hybrid system................................. 64

Emergency shut off system.......... 70
Energy monitor/consumption screen

................................................... 99

EV drive mode ........................... 166
High voltage components ............ 67
Hybrid system precautions........... 67
If the hybrid system will not start 405
Overheating ............................... 414
Power (ignition) switch ............... 162
Regenerative braking................... 65
Starting the hybrid system ......... 162

Hybrid System Indicator ... 82, 83, 87, 

89

Hybrid transmission..................... 168

If the shift lever cannot be shifted 

from P ...................................... 169

Hybrid vehicle driving tips........... 245

I

Identification

Engine........................................ 419
Vehicle ....................................... 418

Ignition switch (power switch) .... 162

Auto power off function .............. 164
Changing the power switch modes

................................................. 164

If your vehicle has to be stopped in 

an emergency .......................... 370

Illuminated entry system ............. 307
Immobilizer system ........................ 71
Indicators ........................................ 80
Initialization

Items to initialize ........................ 435
Power windows .......................... 146

Tire pressure warning system ....348

Inside rear view mirror .................143
Interior lights.................................306

Front interior light .......................306
Rear interior light........................306
Wattage......................................425

J

Jack

Positioning a floor jack ...............335
Vehicle-equipped jack ................399

Jack handle ...................................399
Jam protection function

Moon roof ...................................149
Power back door ........................121
Power windows ..........................146

K

Keyless entry

Smart entry & start system.........127
Wireless remote control .............107

Keys

Battery-saving function...............128
Electronic key.............................106
If the electronic key does not operate 

properly ....................................407

If you lose your keys ..................407
Key number plate .......................106
Keyless entry.............. 111, 117, 127
Mechanical key ..........................106
Power switch ..............................162
Replacing the battery .................358
Warning buzzer ..........................128
Wireless remote control .............107

Knee airbags ...................................29

L

Lane Tracing Assist (LTA)

Operation ...................................200
Warning messages.....................208

Language (multi-information dis-

play) ...............................................97

COROLLA CROSS HYBRID_OM_General_OM16537E

Summary of Contents for COROLLA CROSS HYBRID 2020









































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for COROLLA CROSS HYBRID 2020

EAL Formula 523585 Assembly Instructions preview
Formula 523585
Brand: EAL Pages: 4
Harbor Freight Tools 92043 Assembly And Operating Instructions preview
92043
Brand: Harbor Freight Tools Pages: 4
Rightline Gear Car Top Duffle Bag Setup Manual preview
Car Top Duffle Bag
Brand: Rightline Gear Pages: 2
Maserati Gransport Owner'S Manual preview
Gransport
Brand: Maserati Pages: 210
OnStar liveon Owner'S Manual preview
liveon
Brand: OnStar Pages: 22
VDO DLD Wide Range II Installation Instructions Manual preview
DLD Wide Range II
Brand: VDO Pages: 84
Wagan TravelCharge Companion GO-Plus User Manual preview
TravelCharge Companion GO-Plus
Brand: Wagan Pages: 3
walser 30968 User Instructions preview
30968
Brand: walser Pages: 24
Volvo 164 1969 Service Manual preview
164 1969
Brand: Volvo Pages: 266
E&G Classics 1409-0102-10 Installation Instructions preview
1409-0102-10
Brand: E&G Classics Pages: 3
Cadillac 2003 Seville Owner'S Manual preview
2003 Seville
Brand: Cadillac Pages: 402
Cobra BAK R294 Manual preview
BAK R294
Brand: Cobra Pages: 2
CrimeStopper CA-504.BRKT Install Manual preview
CA-504.BRKT
Brand: CrimeStopper Pages: 1
TATA Motors Harrier 2021 Owner'S Manual preview
Harrier 2021
Brand: TATA Motors Pages: 308
Rhino-Rack S400-FK2 Instructions preview
S400-FK2
Brand: Rhino-Rack Pages: 2
Roadmaster Even Brake 9400 Owner'S Manual preview
Even Brake 9400
Brand: Roadmaster Pages: 20
Charge Amps Halo Pole Mount Manual preview
Halo Pole Mount
Brand: Charge Amps Pages: 14
Subaru impreza 2017 Owner'S Manual preview
impreza 2017
Brand: Subaru Pages: 786

Brands by name

Popular brands

Load more brands