Toyota COROLLA CROSS HYBRID 2020 Owner'S Manual Download Page 359

Page: 359 / 456

357

7-3. Do-it-yourself maintenance

Maintenance and care

COROLLA CROSS HYBRID_Kouzui_GE

WARNING

■

When removing the air intake

vent cover

Do not touch the service plug located

near the air intake vent. (



P.68)

NOTICE

■

When cleaning the air intake vent

When cleaning the air intake vent,

make sure to only use a vacuum to

suck out dust and clogs. If a com-

pressed air blow gun, etc. is used to

blow out dust and clogs, the dust or

clogs may be pushed into the air

intake vent, which may affect the per-

formance of the hybrid battery (trac-

tion battery) and cause a malfunction.

■

To prevent damage to the vehicle

●

Do not allow liquid or foreign mate-

rial to enter the air intake vent when

the cover is removed.

●

Carefully handle the removed filter

so that it will not be damaged.

If the filter is damaged, have it

replaced with a new filter by your

Toyota dealer.

●

Make sure to reinstall the filter and

cover to their original positions after

cleaning.

●

Do not install anything to the air

intake vent other than the exclusive

filter for this vehicle or use the vehi-

cle without the filter installed.

■

If “Maintenance Required for

Traction Battery Cooling Parts

See Owner’s Manual” is dis-

played on the multi-information

display

If the vehicle is continuously driven

with the warning message (indicating

that charging/discharging of the

hybrid battery [traction battery] may

become limited) displayed, the hybrid

battery (traction battery) may mal-

function. If the warning message is

displayed, clean the air intake vent

immediately.

COROLLA CROSS HYBRID_OM_General_OM16537E

Summary of Contents for COROLLA CROSS HYBRID 2020









































































































































































































































































































































































































































































Search results

Summary of Contents for COROLLA CROSS HYBRID 2020

Reviews:

Related manuals for COROLLA CROSS HYBRID 2020

Brands by name

Popular brands

Toyota COROLLA CROSS HYBRID 2020, Owner'S Manual

Search results

Summary of Contents for COROLLA CROSS HYBRID 2020

Reviews:

Related manuals for COROLLA CROSS HYBRID 2020

Brands by name

Popular brands