Toyota COROLLA CROSS HYBRID 2020 Owner'S Manual Download Page 275

Page: 275 / 456

273

5-5. Using an external device

Audio system

COROLLA CROSS HYBRID_Kouzui_GE

Selecting a file, fast-forwarding or rewinding

■

Selecting folders one at a time

Press (<FOLDER)

(FOLDER>) to select the

desired folder.

■

Selecting a folder and file from
folder list

Press (LIST).

The folder list will be displayed.

Turn and press the knob to
select a folder and file.

To return to the previous display, press

(BACK).

■

Returning to the first folder

Press and hold

(<FOLDER) until

you hear a beep.

■

Selecting a file

Turn the “TUNE•SELECT” knob or
press the “SEEK >” or “< TRACK”
button to move up or down to select
the desired file.

■

Fast-forwarding and rewinding
files

Press and hold the “SEEK >” or “<
TRACK” button until you hear a
beep.

■

Random play

Pressing (RDM)

changes

modes in the following order:
Folder random



All folder ran-

dom



Off

■

Repeat play

Pressing (RPT)

changes

modes

in the following order: File
repeat



Folder repeat



Off

: Available except when “RDM” (ran-

dom play) is selected

■

Switching the display

Press

(TEXT) to display or hide

the album title.

If there are continuing texts,

is dis-

played.

Press and hold

(TEXT) until you

hear a beep to display the remaining
texts.

■

USB memory functions

●

Depending on the USB memory that

is connected to the system, the device

itself may not be operable and certain

functions may not be available. If the

device is inoperable or a function is

unavailable due to a malfunction (as

opposed to a system specification),

disconnecting the device and recon-

necting it once again may resolve the

problem.

●

If the USB memory still does not begin

operation after being disconnected

and reconnected, format the memory.

■

Display



P.263

■

Error messages

If an error message is displayed, refer to

the following table and take the appro-

priate measures. If the problem is not

rectified, take the vehicle to your Toyota

dealer.

Using a USB memory

COROLLA CROSS HYBRID_OM_General_OM16537E

Summary of Contents for COROLLA CROSS HYBRID 2020









































































































































































































































































































































































































































































Search results

Summary of Contents for COROLLA CROSS HYBRID 2020

Reviews:

Related manuals for COROLLA CROSS HYBRID 2020

Brands by name

Popular brands

Toyota COROLLA CROSS HYBRID 2020, Owner'S Manual

Search results

Summary of Contents for COROLLA CROSS HYBRID 2020

Reviews:

Related manuals for COROLLA CROSS HYBRID 2020

Brands by name

Popular brands