manualshive.com logo in svg

Toyota COROLLA CROSS HYBRID 2020, Owner'S Manual, Page: 26 / 456

Share
Download
Toyota COROLLA CROSS HYBRID 2020 Owner'S Manual Download Page 26

24

1-1. For safe use

COROLLA CROSS HYBRID_Kouzui_GE

Make sure that all occupants are 
wearing their seat belts before driv-
ing the vehicle. (

P.25)

Use a child restraint system appro-
priate for the child until the child 
becomes large enough to properly 
wear the vehicle’s seat belt. 
(

P.40)

Make sure that you can see back-
ward clearly by adjusting the inside 
and outside rear view mirrors prop-
erly. (

P.143, 144)

WARNING

●

Do not adjust the position of the 

driver’s seat while driving.

Doing so could cause the driver to 

lose control of the vehicle.

●

Do not place a cushion between the 

driver or passenger and the 

seatback.

A cushion may prevent correct pos-

ture from being achieved, and 

reduce the effectiveness of the seat 

belt and head restraint.

●

Do not place anything under the 

front seats.

Objects placed under the front 

seats may become jammed in the 

seat tracks and stop the seat from 

locking in place. This may lead to 

an accident and the adjustment 

mechanism may also be damaged.

●

Always observe the legal speed 

limit when driving on public roads.

●

When driving over long distances, 

take regular breaks before you start 

to feel tired.

Also, if you feel tired or sleepy while 

driving, do not force yourself to con-

tinue driving and take a break 

immediately.

●

Take care when adjusting the seat 

position to ensure that other pas-

sengers are not injured by the mov-

ing seat.

●

When adjusting the seat position, 

do not put your hands under the 

seat or near the moving parts to 

avoid injury. Fingers or hands may 

become jammed in the seat mecha-

nism.

Correct use of the seat belts

Adjusting the mirrors

COROLLA CROSS HYBRID_OM_General_OM16537E

Summary of Contents for COROLLA CROSS HYBRID 2020









































































































































































































































































































































































































































































Reviews:

No comments