manualshive.com logo in svg

Toyota COROLLA CROSS HYBRID 2020, Owner'S Manual

The Toyota COROLLA CROSS HYBRID 2020 Owner's Manual is an essential guide for every owner. Easily downloadable and completely free, this comprehensive manual provides detailed information on the vehicle's features, maintenance, and troubleshooting. Download it now from manualshive.com to maximize your driving experience.

Share
Download
background image

443

Alphabetical Index

COROLLA CROSS HYBRID_Kouzui_GE

Back door................................... 115
Door glasses .............................. 146
Door lock.................................... 115
Open door warning buzzer. 112, 114
Outside rear view mirrors........... 144
Rear door child-protectors ......... 114

Drive distance................................. 97
Drive information............................ 97
Drive-start control ........................ 155
Driving

Break-in tips ............................... 155
Correct driving posture................. 23
Driving mode select switch ........ 238
Hybrid vehicle driving tips .......... 245
Procedures................................. 154
Winter drive tips ......................... 247

Driving information display........... 94
Driving range .................................. 94
Driving support system information 

display........................................... 96

Dynamic radar cruise control...... 209

Warning message ...................... 217

E

eCall................................................. 60

“SOS” button ................................ 60

ECB (Electronically Controlled Brake 

System) ....................................... 239

ECO Accelerator Guidance............ 95
Eco score ........................................ 95
EDR (Event data recorder)............... 7
Elapsed time ................................... 97
Electric motor (traction motor)...... 64
Electric Power Steering (EPS)..... 240

Warning light .............................. 380

Electronic key ............................... 106

Battery-saving function .............. 128
If the electronic key does not operate 

properly.................................... 407

Replacing the battery ................. 358

Electronically Controlled Brake Sys-

tem (ECB).................................... 239

Emergency brake signal .............. 240

Emergency flashers

Emergency brake signal.............240

Emergency tire puncture .............389
Emergency, in case of

If a warning buzzer sounds ........378
If a warning light turns on ...........378
If a warning message is displayed

.................................................386

If the 12-volt battery is discharged

.................................................409

If the electronic key does not operate 

properly ....................................407

If the hybrid system will not start 405
If the vehicle is trapped in rising 

water ........................................371

If you have a flat tire...........389, 399
If you lose your keys ..................407
If you think something is wrong..376
If your vehicle becomes stuck ....416
If your vehicle has to be stopped in 

an emergency ..........................370

If your vehicle needs to be towed

.................................................373

If your vehicle overheats ............413

Energy monitor ...............................99
Engine

ACCESSORY mode...................164
Compartment .............................336
Engine switch .............................162
Hood...........................................334
How to start the hybrid system...162
Identification number..................419
If the hybrid system will not start 405
If your vehicle has to be stopped in 

an emergency ..........................370

Ignition switch (power switch) ....162
Overheating................................413
Power switch ..............................162

Engine coolant

Capacity .....................................422
Checking ....................................338
Preparing and checking before win-

ter.............................................247

Engine coolant temperature gauge

.................................................82, 87

COROLLA CROSS HYBRID_OM_General_OM16537E

Summary of Contents for COROLLA CROSS HYBRID 2020









































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for COROLLA CROSS HYBRID 2020

Yakima SkyBox 12 Installation Instructions Manual preview
SkyBox 12
Brand: Yakima Pages: 6
Yakima HoldUp Plus2 Manual preview
HoldUp Plus2
Brand: Yakima Pages: 18
Tamiya KO PROPO RTF 2002 ESC Manual preview
KO PROPO RTF 2002 ESC
Brand: Tamiya Pages: 2
GMC YUKON 2018 Owner'S Manual preview
YUKON 2018
Brand: GMC Pages: 425
John Gold Gold Cruuse Cruisecontrol GC90 Installation Manual preview
Gold Cruuse Cruisecontrol GC90
Brand: John Gold Pages: 24
Whispbar K498W Fitting Instructions Manual preview
K498W
Brand: Whispbar Pages: 14
Thule 1511 Instructions Manual preview
1511
Brand: Thule Pages: 8
Nav TV AUDI A6 Installation Manual preview
AUDI A6
Brand: Nav TV Pages: 5
Dodge Ram Commercial2016 Owner'S Manual preview
Ram Commercial2016
Brand: Dodge Pages: 675
TBC 645624 Instruction Manual preview
645624
Brand: TBC Pages: 12
Prorack K194 Fitting Instructions For Basic Carrier preview
K194
Brand: Prorack Pages: 14
TAUBENREUTHER 29-T080301 Quick Start Manual preview
29-T080301
Brand: TAUBENREUTHER Pages: 8
Parkeon StradaPAL Installation Manual preview
StradaPAL
Brand: Parkeon Pages: 43
Kargo Master 8006A Instruction Manual preview
8006A
Brand: Kargo Master Pages: 19
Safe Fleet PRIME DESIGN VBR3-FT31B Manual preview
PRIME DESIGN VBR3-FT31B
Brand: Safe Fleet Pages: 12
Oldsmobile 2000 Oldsmobile Intrigue Owner'S Manual preview
2000 Oldsmobile Intrigue
Brand: Oldsmobile Pages: 348
v.link VL2-DVD900 Manual preview
VL2-DVD900
Brand: v.link Pages: 19
Skoda Fabia Combi 5J Fitting Instructions preview
Fabia Combi 5J
Brand: Skoda Pages: 2

Brands by name

Popular brands

Load more brands