manualshive.com logo in svg

Toyota COROLLA CROSS HYBRID 2020, Owner'S Manual, Page: 401 / 456

Share
Download
Toyota COROLLA CROSS HYBRID 2020 Owner'S Manual Download Page 401

399

8

8-2. Steps to take in an emergency

When trouble arises

COROLLA CROSS HYBRID_Kouzui_GE

Stop the vehicle in a safe place 
on a hard, flat surface.

Set the parking brake.

Shift the shift lever to P.

Stop the hybrid system.

Turn on the emergency flashers.

Jack handle

Wheel nut wrench

Jack

If you have a flat tire 

(vehicles with a spare 

tire)

Your vehicle is equipped with a 
spare tire. The flat tire can be 
replaced with the spare tire.

For details about tires: 

P.343

WARNING

■

If you have a flat tire

Do not continue driving with a flat tire. 

Driving even a short distance with a 

flat tire can damage the tire and the 

wheel beyond repair, which could 

result in an accident.

Before jacking up the vehi-
cle

Location of the spare tire, jack and tools

COROLLA CROSS HYBRID_OM_General_OM16537E

Summary of Contents for COROLLA CROSS HYBRID 2020









































































































































































































































































































































































































































































Reviews:

No comments