Toyota COROLLA CROSS HYBRID 2020 Owner'S Manual Download Page 271

Page: 271 / 456

269

5-5. Using an external device

Audio system

COROLLA CROSS HYBRID_Kouzui_GE

Press (LIST).

The song list will be displayed.

Turn the “TUNE•SELECT” knob
to select a song.

Press the knob to play the song.

To return to the previous display, press

(BACK).

Press and hold the “SEEK >” or “<
TRACK” button until you hear a
beep.

Pressing

(RPT) changes modes

in the following order: Track
repeat



Album repeat



Off

: Album repeat mode may not be avail-

able depending on the iPod devices
you have.

Pressing (RDM)

changes

modes in the following order: Track
random



Album random



Off

Press the

(TEXT) to display or

hide the album title.

If there are continuing texts,

is dis-

played.

Press and hold

(TEXT) until you

hear a beep to display the remaining
texts.

■

About iPod

●

Use of the Made for Apple badge

means that an accessory has been

designed to connect specifically to the

Apple product(s) identified in the

badge, and has been certified by the

developer to meet Apple performance

standards. Apple is not responsible for

the operation of this device or its com-

pliance with safety and regulatory

standards. Please note that the use of

this accessory with an Apple product

may affect wireless performance.

●

iTunes U, iPod, iPod touch, iPod nano

and iPhone are trademarks of Apple

Inc., registered in the U.S. and other

countries.

■

iPod functions

●

When an iPod is connected and the

audio source is changed to iPod

mode, the iPod will resume play from

the same point in which it was last

used.

●

Depending on the iPod that is con-

nected to the system, certain func-

tions may not be available.

Disconnecting the device and recon-

necting it once again may resolve

some malfunctions.

●

While connected to the system, the

iPod cannot be operated with its own

controls. It is necessary to use the

Selecting a song from the
song list

Fast-forwarding and rewind-
ing songs

Repeat play

Random play

Switching the display

COROLLA CROSS HYBRID_OM_General_OM16537E

Summary of Contents for COROLLA CROSS HYBRID 2020









































































































































































































































































































































































































































































Search results

Summary of Contents for COROLLA CROSS HYBRID 2020

Reviews:

Related manuals for COROLLA CROSS HYBRID 2020

Brands by name

Popular brands

Toyota COROLLA CROSS HYBRID 2020, Owner'S Manual

Search results

Summary of Contents for COROLLA CROSS HYBRID 2020

Reviews:

Related manuals for COROLLA CROSS HYBRID 2020

Brands by name

Popular brands