Toyota COROLLA CROSS HYBRID 2020 Owner'S Manual Download Page 35

Page: 35 / 456

1-1. For safe use

For safety and security

COROLLA CROSS HYBRID_Kouzui_GE

●

Any of the SRS airbags have been

inflated.

●

The front of the vehicle is damaged or

deformed, or was involved in an acci-

dent that was not severe enough to

cause the SRS front airbags to inflate.

●

Vehicles with SRS side and curtain

shield airbags (except for Taiwan): A

portion of a door or its surrounding

area is damaged or deformed, or the

vehicle was involved in an accident

that was not severe enough to cause

the SRS side and curtain shield

airbags to inflate.

●

Vehicles with SRS side and curtain

shield airbags (for Taiwan): A portion

of a door or its surrounding area is

damaged, deformed or has had a hole

made in it, or the vehicle was involved

in an accident that was not severe

enough to cause the SRS side and

curtain shield airbags to inflate.

●

Vehicles without an SRS driver’s knee

airbag: The pad section of the steer-

ing wheel or dashboard near the front

passenger airbag is scratched,

cracked, or otherwise damaged.

●

Vehicles with an SRS driver’s knee

airbag: The pad section of the steer-

ing wheel, dashboard near the front

passenger airbag or lower portion of

the instrument panel is scratched,

cracked, or otherwise damaged.

●

Vehicles with SRS side airbags: The

surface of the seats with the SRS side

airbag is scratched, cracked, or other-

wise damaged.

●

Vehicles with SRS curtain shield

airbags: The portion of the front pil-

lars, rear pillars or roof side rail gar-

nishes (padding) containing the SRS

curtain shield airbags inside is

scratched, cracked, or otherwise dam-

aged.

COROLLA CROSS HYBRID_OM_General_OM16537E

Summary of Contents for COROLLA CROSS HYBRID 2020









































































































































































































































































































































































































































































Search results

Summary of Contents for COROLLA CROSS HYBRID 2020

Reviews:

Related manuals for COROLLA CROSS HYBRID 2020

Brands by name

Popular brands

Toyota COROLLA CROSS HYBRID 2020, Owner'S Manual

Search results

Summary of Contents for COROLLA CROSS HYBRID 2020

Reviews:

Related manuals for COROLLA CROSS HYBRID 2020

Brands by name

Popular brands