manualshive.com logo in svg

Toyota COROLLA CROSS HYBRID 2020, Owner'S Manual, Page: 52 / 456

Share
Download
Toyota COROLLA CROSS HYBRID 2020 Owner'S Manual Download Page 52

50

1-2. Child safety

COROLLA CROSS HYBRID_Kouzui_GE

ahead of the child seat belt 
guide, move the seat cushion 
forward.

When installing a junior seat, if 
the child in your child restraint 
system is in a very upright posi-
tion, adjust the seatback angle to 
the most comfortable position. 
And if the seat belt shoulder 
anchor is ahead of the child seat 
belt guide, move the seat cush-
ion forward.

■

Child restraint system compat-
ibility for each seating posi-
tion

Compatibility of each seating posi-
tion with child restraint systems 
(

P.47) displays the type of child 

restraint systems that can be used 
and possible seating positions for 
installation using symbols.
Check the selected child restraint 
system together with the following 
[Before confirming the compatibility 
of each seating position with child 

restraint systems].

■

Before confirming the compat-
ibility of each seating position 
with child restraint systems

1

Checking the child restraint sys-
tem standards.
Use a child restraint system that 
conforms to UN(ECE) R44

*1

 or 

UN(ECE) R129

*1, 2

.

The following approval mark is 
displayed on child restraint sys-
tems which are conformed.
Check for an approval mark 
attached to the child restraint 
system.

Example of the displayed regulation 
number

UN(ECE) R44 approval mark

*3

The weight range of the child 
who is applicable for an 
UN(ECE) R44 approval mark is 
indicated.

UN(ECE) R129 approval mark

*3

The height range of the child 
who is applicable as well as 

Child restraint system com-
patibility for each seating 
position (for Morocco)

COROLLA CROSS HYBRID_OM_General_OM16537E

Summary of Contents for COROLLA CROSS HYBRID 2020









































































































































































































































































































































































































































































Reviews:

No comments