Toyota COROLLA CROSS HYBRID 2020 Owner'S Manual Download Page 180

Page: 180 / 456

178

4-3. Operating the lights and wipers

COROLLA CROSS HYBRID_Kouzui_GE



Front and rear fog light switch

Turns the front and rear fog

lights off

Turns the front fog lights on

Turns the front and rear fog

lights on

Releasing the switch ring returns it

Operating the switch ring again turns
only the rear fog light off.

■

Fog lights can be used when



Vehicles with a rear fog light switch

The headlights are turned on.



Vehicles with a front and rear fog light

switch

Front fog lights: The headlights or the

front position lights are turned on.

Rear fog light: The headlights or the

front fog lights are turned on.

Operating the

lever oper-

ates the wipers or washer as fol-
lows.



Intermittent windshield wipers
with interval adjuster

Intermittent windshield

wiper operation

Windshield wipers and

washer

Operating the lever can use the
windshield wipers or the
washer.

NOTICE

■

When the windshield is dry

Do not use the wipers, as they may

damage the windshield.

Operating the wiper lever

COROLLA CROSS HYBRID_OM_General_OM16537E

Summary of Contents for COROLLA CROSS HYBRID 2020









































































































































































































































































































































































































































































Search results

Summary of Contents for COROLLA CROSS HYBRID 2020

Reviews:

Toyota COROLLA CROSS HYBRID 2020, Owner'S Manual, Page: 180 / 456

Search results

Summary of Contents for COROLLA CROSS HYBRID 2020

Reviews: