Toyota COROLLA CROSS HYBRID 2020 Owner'S Manual Download Page 404

Page: 404 / 456

402

8-2. Steps to take in an emergency

COROLLA CROSS HYBRID_Kouzui_GE

Slightly loosen the wheel nuts
(one turn).

Turn the tire jack portion

hand until the center of the
recessed portion of the jack is in
contact with the center of the
jack point.

Assemble the jack handle
extension.

Raise the vehicle until the tire is
slightly raised off the ground.

Remove all the wheel nuts and
the tire.

When resting the tire on the ground,

place the tire so that the wheel design

faces up to avoid scratching the wheel

surface.

WARNING

■

Replacing a flat tire

●

Do not touch the disc wheels or the

area around the brakes immedi-

ately after the vehicle has been

driven. After the vehicle has been

driven the disc wheels and the area

around the brakes will be extremely

hot. Touching these areas with

hands, feet or other body parts

while changing a tire, etc. may

result in burns.

COROLLA CROSS HYBRID_OM_General_OM16537E

Summary of Contents for COROLLA CROSS HYBRID 2020









































































































































































































































































































































































































































































Search results

Summary of Contents for COROLLA CROSS HYBRID 2020

Reviews:

Related manuals for COROLLA CROSS HYBRID 2020

Brands by name

Popular brands

Toyota COROLLA CROSS HYBRID 2020, Owner'S Manual

Search results

Summary of Contents for COROLLA CROSS HYBRID 2020

Reviews:

Related manuals for COROLLA CROSS HYBRID 2020

Brands by name

Popular brands