Toyota COROLLA CROSS HYBRID 2020 Owner'S Manual Download Page 441

Page: 441 / 456

439

What to do if... (Troubleshooting)

COROLLA CROSS HYBRID_Kouzui_GE

If you cannot release the shift lever by
depressing the brake pedal with the
power switch in ON. (



P.169)



It is locked automatically to pre-
vent theft of the vehicle.
(



P.162)



Is the window lock switch
pressed?

The power window except for the one
at the driver’s seat cannot be operated
if the window lock switch is pressed.
(



P.148)



The auto power off function will
be operated if the vehicle is left
in ACC or ON (the hybrid system
is not operating) for a period of
time. (



P.164)



The seat belt reminder light is
flashing

Are the driver and the passenger wear-
ing the seat belts? (



P.381)



The parking brake indicator is on

Is the parking brake released?

(



P.171)

Depending on the situation, other
types of warning buzzer may also
sound. (



P.378, 3 86)



Did anyone inside the vehicle
open a door during setting the
alarm?

The sensor detects it and the alarm
sounds. (



P.75)

Do one of the following to deacti-
vate or stop the alarms:



Unlock the doors.



Turn the power switch to ACC or
ON, or start the hybrid system.
(The alarm will be deactivated or
stopped after a few seconds.)



Is the electronic key left inside
the vehicle?

Check the message on the multi-infor-
mation display. (



P.386)



When a warning light turns on or
a warning message is displayed,
refer to P.378, 386.

The steering wheel cannot
be turned after the hybrid
system is stopped

The windows do not open or
close by operating the
power window switches

The power switch is turned
off automatically

A warning buzzer sounds
during driving

An alarm is activated and the
horn sounds (vehicles with
an alarm)

A warning buzzer sounds
when leaving the vehicle

A warning light turns on or a
warning message is dis-
played

COROLLA CROSS HYBRID_OM_General_OM16537E

Summary of Contents for COROLLA CROSS HYBRID 2020









































































































































































































































































































































































































































































Search results

Summary of Contents for COROLLA CROSS HYBRID 2020

Reviews:

Related manuals for COROLLA CROSS HYBRID 2020

Brands by name

Popular brands

Toyota COROLLA CROSS HYBRID 2020, Owner'S Manual

Search results

Summary of Contents for COROLLA CROSS HYBRID 2020

Reviews:

Related manuals for COROLLA CROSS HYBRID 2020

Brands by name

Popular brands