manualshive.com logo in svg

Toyota COROLLA CROSS HYBRID 2020, Owner'S Manual, Page: 406 / 456

Share
Download
Toyota COROLLA CROSS HYBRID 2020 Owner'S Manual Download Page 406

404

8-2. Steps to take in an emergency

COROLLA CROSS HYBRID_Kouzui_GE

loose contact with the disc wheel 

.

3

Lower the vehicle.

4

Firmly tighten each wheel nut 
two or three times in the order 
shown in the illustration.

Tightening torque:

103 N•m (10.5 kgf•m, 76 ft•lbf)

5

Vehicles with a steel wheel: 
Reinstall the wheel ornament.

Align the cutout of the wheel ornament 

with the valve stem as shown in the 

illustration.

6

Stow the flat tire, tire jack and all 
tools.

■

After completing the tire change 

(vehicles with a tire pressure warn-

ing system)

The tire pressure warning system must 

be reset. (

P.348)

WARNING

■

After using the tools and jack

Before driving, make sure all the tools 

and jack are securely in place in their 

storage location to reduce the possi-

bility of personal injury during a colli-

sion or sudden braking.

NOTICE

■

When replacing the tires (vehi-

cles with a tire pressure warning 

system)

When removing or fitting the wheels, 

tires or the tire pressure warning 

valve and transmitter, contact your 

Toyota dealer as the tire pressure 

warning valve and transmitter may be 

damaged if not handled correctly.

COROLLA CROSS HYBRID_OM_General_OM16537E

Summary of Contents for COROLLA CROSS HYBRID 2020









































































































































































































































































































































































































































































Reviews:

No comments