Toyota 2001 Camry Page 58 Owner'S Manual Download

Page: 58 / 268

’01Camry_U (L/O 0009)

2001 MY CAMRY (OM33528U)

In the following cases, contact your Toyota

dealer as soon as possible:

The SRS front airbags have been in-

flated.

The front part of the vehicle (shaded

in the illustration) was involved in an

accident that was not severe enough to
cause the SRS front airbags to inflate.

The pad section of the steering wheel
or front passenger airbag cover

(shaded in the illustration) is scratched,

cracked, or otherwise damaged.

NOTICE

Do not disconnect the battery cables
before contacting your Toyota dealer.

SRS side airbags

The SRS (Supplemental Restraint Sys-

tem) side airbags are designed to pro-
vide further protection for the driver

and front passenger in addition to the

primary safety protection provided by
the seat belts.

In response to a severe side impact, the
SRS side airbags work together with the

seat belts to help reduce injury by inflat-

ing. The SRS side airbags help to reduce
injuries mainly to the driver’s or front pas-

senger’s chest. The SRS side airbag on

the passenger seat is activated even with
no passenger in the front seat.
Be sure to wear your seat belt properly.

Summary of Contents for 2001 Camry













































































































































































































































































Search results

Summary of Contents for 2001 Camry

Reviews:

Related manuals for 2001 Camry

Brands by name

Popular brands

Toyota 2001 Camry, Owner'S Manual

Search results

Summary of Contents for 2001 Camry

Reviews:

Related manuals for 2001 Camry

Brands by name

Popular brands