Toyota 2001 Camry Page 174 Owner'S Manual Download

Page: 174 / 268

’01Camry_U (L/O 0009)

166

2001 MY CAMRY (OM33528U)

Install all 4 tires of specified size at

appropriate pressure: The anti

−

lock

brake system detects vehicle speeds

using the speed sensors for respec-

tive wheels’ turning speeds. The use

of tires other than specified may fail

to detect the accurate turning speed

resulting in a longer stopping dis-

tance.

Type A

Type B

“ABS” warning light

The light comes on when the ignition key

is turned to the “ON” position. If the anti

−

lock brake system works properly, the

light turns off after a few seconds. There-

after, if the system malfunctions, the light
comes on again.
When the “ABS” warning light is on (and
the brake system warning light is off), the

anti

−

lock brake system and the traction

control system do not operate, but the
brake system still operates conventionally.
When the “ABS” warning light is on (and

the brake system warning light is off), the
anti

−

lock brake system does not operate

so that the wheels could lock up during

a sudden braking or braking on slippery
road surfaces.

If either of the following conditions
occurs, this indicates a malfunction

somewhere in the parts monitored by

the warning light system. Contact your
Toyota dealer as soon as possible to

service the vehicle.

The light does not come on when the

ignition key is turned to the “ON” posi-

tion, or remains on.

The light comes on while you are driv-

ing.

Summary of Contents for 2001 Camry













































































































































































































































































Search results

Summary of Contents for 2001 Camry

Reviews:

Related manuals for 2001 Camry

Brands by name

Popular brands

Toyota 2001 Camry, Owner'S Manual

Search results

Summary of Contents for 2001 Camry

Reviews:

Related manuals for 2001 Camry

Brands by name

Popular brands