Toyota 2001 Camry Page 240 Owner'S Manual Download

Page: 240 / 268

’01Camry_U (L/O 0009)

232

2001 MY CAMRY (OM33528U)

Replacement with used wheels is not rec-

ommended as they may have been sub-

jected to rough treatment or high mileage
and could fail without warning. Also, bent

wheels which have been straightened may

have structural damage and therefore
should not be used. Never use an inner

tube in a leaking wheel which is designed

for a tubeless tire.

Aluminum wheel precautions

When installing aluminum wheels,

check that the wheel nuts are tight

after driving your vehicle the first 1600
km (1000 miles).

If you have rotated, repaired, or

changed your tires, check that the
wheel nuts are still tight after driving

1600 km (1000 miles).

When using tire chains, be careful not

to damage the aluminum wheels.

Use only the Toyota wheel nuts and
wrench designed for your aluminum

wheels.

When balancing your wheels, use only

Toyota balance weights or equivalent

and a plastic or rubber hammer.

As with any wheel, periodically check

your aluminum wheels for damage. If
damaged, replace immediately.

Summary of Contents for 2001 Camry













































































































































































































































































Search results

Summary of Contents for 2001 Camry

Reviews:

Related manuals for 2001 Camry

Brands by name

Popular brands

Toyota 2001 Camry, Owner'S Manual

Search results

Summary of Contents for 2001 Camry

Reviews:

Related manuals for 2001 Camry

Brands by name

Popular brands