Toyota 2001 Camry Page 54 Owner'S Manual Download

Page: 54 / 268

’01Camry_U (L/O 0009)

2001 MY CAMRY (OM33528U)

A crash severe enough to inflate the air-

bags may break the windshield as the

vehicle buckles. In vehicles with a pas-
senger airbag the windshield may also be

damaged by absorbing some of the force

of the inflating airbag.

CAUTION

The SRS airbag system is designed
only as a supplement to the prima-

ry protection of the driver side and

front passenger side seat belt sys-
tems. The front seat occupants can

be killed or seriously injured by the

inflating airbags if they do not wear
the available seat belts properly.

During sudden braking just before

a collision, an unrestrained driver
or front passenger can move for-

ward into direct contact with or

close proximity to the airbag which
may then deploy during the colli-

sion. To ensure maximum protection

in an accident, the driver and all
passengers in the vehicle must

wear their seat belts properly. Wear-

ing a seat belt properly during an
accident reduces the chances of

death or serious injury or being

thrown out of the vehicle. For in-
structions and precautions concern-

ing the seat belt system, see “Seat

belts” in this section.

Improperly seated and/or restrained
infants and children can be killed

or seriously injured by the deploy-

ing front airbags. An infant or child
who is too small to use a seat belt

should be properly secured using a

child restraint system. Toyota
strongly recommends that all in-

fants and children be placed in the

rear seat of the vehicle and proper-
ly restrained. The rear seat is the

safest for infants and children. For

instructions concerning the installa-
tion of a child restraint system, see

“Child restraint” in this section.

Summary of Contents for 2001 Camry













































































































































































































































































Search results

Summary of Contents for 2001 Camry

Reviews:

Related manuals for 2001 Camry

Brands by name

Popular brands

Toyota 2001 Camry, Owner'S Manual

Search results

Summary of Contents for 2001 Camry

Reviews:

Related manuals for 2001 Camry

Brands by name

Popular brands