Toyota 2001 Camry Page 95 Owner'S Manual Download

Page: 95 / 268

’01Camry_U (L/O 0009)

2001 MY CAMRY (OM33528U)

(k)

Add washer fluid.

(l)

Take vehicle to
Toyota dealer.

(m)

Remove key.

Key reminder
buzzer

If the indicator or
buzzer comes on...

Do this.

(a) Brake System Warning Light

This light comes on in the following cases

when the ignition key is in the “ON” posi-
tion.

When the parking brake is applied...

When the brake fluid level is low...

CAUTION

It is dangerous to continue driving
normally when the brake fluid level is

low.

Have your vehicle checked at your

Toyota dealer in the following case:

The light does not come on even if the

parking brake is applied when the igni-

tion key is in the “ON” position.

CAUTION

If the light does not turn off even
after the parking brake is released

while the engine is running, immedi-

ately stop your vehicle at a safe
place and contact your Toyota dealer.

In this case, the brakes may not work

properly and your stopping distance
will become longer. Depress the brake

pedal firmly and bring the vehicle to

an immediate stop.

(b) Seat Belt Reminder Light and Buzz-

This light and buzzer remind you to

buckle up the driver’s seat belt.
Once the ignition key is turned to “ON” or

“START”, the reminder light and buzzer

come on if the driver’s seat belt is not
fastened. Unless the driver fastens the

belt, the light stays on and the buzzer

stops after about 4 to 8 seconds.

Summary of Contents for 2001 Camry













































































































































































































































































Search results

Summary of Contents for 2001 Camry

Reviews:

Related manuals for 2001 Camry

Brands by name

Popular brands

Toyota 2001 Camry, Owner'S Manual

Search results

Summary of Contents for 2001 Camry

Reviews:

Related manuals for 2001 Camry

Brands by name

Popular brands