Toyota 2001 Camry Page 50 Owner'S Manual Download

Page: 50 / 268

’01Camry_U (L/O 0009)

2001 MY CAMRY (OM33528U)

NOTICE

Do not perform any of the following

changes without consulting your

Toyota dealer. Such changes can

interfere with proper operation of the

front seat belt pretensioners in some

cases.

Installation of electronic devices

such as a mobile two

−

way radio,

cassette tape player or compact
disc player

Repairs on or near the front seat
belt retractor assemblies

Modification of the suspension sys-

tem

Modification of the front end struc-

ture

Attachment of a grille guard (bull

bar, kangaroo bar, etc.), snowplow,

winches or any other equipment to

the front end

Repairs made on or near the front

fenders, front end structure or con-

sole

This front seat belt pretensioner system

has a service reminder indicator to inform
the driver of operating problems. If any of

the following conditions occurs, this

indicates a malfunction of the airbags or
pretensioners. Contact your Toyota dealer

as soon as possible to service the

vehicle.

The light does not come on when the

ignition key is turned to the “ACC” or
“ON” position, or the light remains on.

The light comes on or flashes while

driving.

If either front seat belt does not retract

or can not be pulled out due to a
malfunction or activation of the relevant

front seat belt pretensioner.

In the following cases, contact your Toyota

dealer as soon as possible:

The front part of the vehicle (shaded

in the illustration) was involved in an
accident that was not severe enough to

cause the front seat belt pretensioners

to operate.

Either front seat belt pretensioner as-

sembly or surrounding area is

scratched, cracked, or otherwise dam-
aged.

Summary of Contents for 2001 Camry













































































































































































































































































Search results

Summary of Contents for 2001 Camry

Reviews:

Related manuals for 2001 Camry

Brands by name

Popular brands

Toyota 2001 Camry, Owner'S Manual

Search results

Summary of Contents for 2001 Camry

Reviews:

Related manuals for 2001 Camry

Brands by name

Popular brands