Toyota 2001 Camry Page 102 Owner'S Manual Download

Page: 102 / 268

’01Camry_U (L/O 0009)

2001 MY CAMRY (OM33528U)

(b) Overdrive switch

You can select either third gear (with
overdrive off) or fourth gear (with over-

drive on) by pushing this switch.
To turn the overdrive off, push the switch.

The “O/D OFF” indicator light should come

on. To turn the overdrive on again, push
the switch again. The “O/D OFF” indicator

light should go off.
Always drive your vehicle with the over-

drive on for better fuel economy and

quieter driving.
If the engine is turned off when the over-

drive is off and restarted, the overdrive

will be on automatically.

Vehicles with cruise control—When the

cruise control is being used, even if you

downshift the transmission by pushing and
releasing the overdrive switch, engine

braking will not be enabled because the

cruise control is not cancelled.
For ways to decrease the vehicle speed,

see “Cruise control” in this section.

(c) Normal driving

1. Start the engine as instructed in “How

to start the engine” in Section 3. The
transmission must be in “P” or “N”.

2. With your foot holding down the brake

pedal, shift the selector lever to “D”.

When the lever is in the “D” position, the

automatic transmission system will select
the most suitable gear for running condi-

tions such as normal cruising, hill climb-
ing, hard towing, etc.
Always turn the overdrive on for better

fuel economy and quieter driving. If the
engine coolant temperature is low, the

transmission will not shift into overdrive

gear even with the overdrive on.

CAUTION

Never put your foot on the accelera-
tor pedal while shifting.

3. Release the parking brake and brake

pedal. Depress the accelerator pedal

slowly for smooth starting.

(d) Using engine braking

To use engine braking, you can downshift
the transmission as follows:

Push the overdrive switch. The “O/D

OFF” indicator light will come on and
the transmission will downshift to third

gear.

Shift into the “2” position. The trans-

mission will downshift to second gear

when the vehicle speed drops down to
or lower than the following speed, and

stronger engine braking will be en-

abled.
5S

−

FE engine

112 km/h (69 mph)

. . . . .

1MZ

−

FE engine

122 km/h (75 mph)

. . . .

Shift into the “L” position. The trans-

mission will downshift to first gear

when the vehicle speed drops down to
or lower than the following speed, and

maximum engine braking will be en-

abled.
5S

−

FE engine

50 km/h (31 mph)

. . . . .

1MZ

−

FE engine

54 km/h (33 mph)

. . . .

Summary of Contents for 2001 Camry













































































































































































































































































Search results

Summary of Contents for 2001 Camry

Reviews:

Related manuals for 2001 Camry

Brands by name

Popular brands

Toyota 2001 Camry, Owner'S Manual

Search results

Summary of Contents for 2001 Camry

Reviews:

Related manuals for 2001 Camry

Brands by name

Popular brands