Toyota 2001 Camry Page 201 Owner'S Manual Download

Page: 201 / 268

’01Camry_U (L/O 0009)

193

2001 MY CAMRY (OM33528U)

To remove the spare tire:

1. Loosen the nut and remove it.
2. Remove the spare tire cover.
3. Loosen the bolt and remove it.
4. Remove the spacer.

Then take the spare tire out of the ve-

hicle.
When storing the spare tire, put it in place
with the outer side of the wheel facing up.

Then secure the tire by repeating the

above removal steps in reverse order to
prevent it from flying forward during a

collision or sudden braking.

—Blocking the wheel

2. Block the wheel diagonally opposite

the flat tire to keep the vehicle from
rolling when it is jacked up.

When blocking the wheel, place a wheel
block from the front for the front wheels

or from the rear for the rear wheels.

—Removing wheel ornament

Type A

Type B

Summary of Contents for 2001 Camry













































































































































































































































































Search results

Summary of Contents for 2001 Camry

Reviews:

Related manuals for 2001 Camry

Brands by name

Popular brands

Toyota 2001 Camry, Owner'S Manual

Search results

Summary of Contents for 2001 Camry

Reviews:

Related manuals for 2001 Camry

Brands by name

Popular brands