Toyota 2001 Camry Page 63 Owner'S Manual Download

Page: 63 / 268

’01Camry_U (L/O 0009)

2001 MY CAMRY (OM33528U)

This SRS side airbag system has a

service reminder indicator to inform the
driver of operating problems. If either of

the following conditions occurs, this

indicates a malfunction of the airbags.
Contact your Toyota dealer as soon as

possible to service the vehicle.

The light does not come on when the

ignition key is turned to the “ACC” or

“ON” position, or the light remains on.

The light comes on or flashes while

driving.

In the following cases, contact your Toyota

dealer as soon as possible:

The SRS side airbags have been in-

flated.

The portion of the doors (shaded in the

illustration) were involved in an acci-

dent that was not severe enough to
cause the SRS side airbags to inflate.

The surface of the seats with the side
airbag (shaded in the illustration) is

scratched, cracked, or otherwise dam-

aged.

NOTICE

Do not disconnect the battery cables
before contacting your Toyota dealer.

Summary of Contents for 2001 Camry













































































































































































































































































Search results

Summary of Contents for 2001 Camry

Reviews:

Related manuals for 2001 Camry

Brands by name

Popular brands

Toyota 2001 Camry, Owner'S Manual

Search results

Summary of Contents for 2001 Camry

Reviews:

Related manuals for 2001 Camry

Brands by name

Popular brands