Toyota 2001 Camry Page 175 Owner'S Manual Download

Page: 175 / 268

’01Camry_U (L/O 0009)

167

2001 MY CAMRY (OM33528U)

A warning light turning on briefly during

operation does not indicate a problem.

DRUM

−

DISC TYPE PARKING BRAKE

SYSTEM (1MZ

−

FE engine)

Your vehicle has a drum

−

disc type

parking brake system. This type of brake

system needs bedding

−

down of the brake

shoes periodically or whenever the parking
brake shoes and/or drums are replaced.
Have your Toyota dealer perform the bed-

ding

−

down.

Brake pad wear limit indicators

The brake pad wear limit indicators on

your disc brakes give a warning noise
when the brake pads are worn to where

replacement is required.

If you hear a squealing or scraping noise

while driving, have the brake pads

checked and replaced by your Toyota
dealer as soon as possible. Expensive ro-

tor damage can result if the pads are not

replaced when necessary.

Luggage stowage precautions

When stowing luggage or cargo in the

vehicle, observe the following:

Put luggage or cargo in the trunk when
at all possible. Be sure all items are

secured in place.

Be careful to keep the vehicle bal-

anced. Locating the weight as far for-

ward as possible helps maintain bal-
ance.

For better fuel economy, do not carry

unneeded weight.

CAUTION

To prevent luggage or packages
from sliding forward during braking,

do not stack anything in the en-

larged trunk. Keep luggage or pack-
ages low, as close to the floor as

possible.

Summary of Contents for 2001 Camry













































































































































































































































































Search results

Summary of Contents for 2001 Camry

Reviews:

Related manuals for 2001 Camry

Brands by name

Popular brands

Toyota 2001 Camry, Owner'S Manual

Search results

Summary of Contents for 2001 Camry

Reviews:

Related manuals for 2001 Camry

Brands by name

Popular brands