Toyota 2001 Camry Page 228 Owner'S Manual Download

Page: 228 / 268

’01Camry_U (L/O 0009)

220

2001 MY CAMRY (OM33528U)

Dispose of used oil and filter only
in a safe and acceptable manner.

Do not dispose of used oil and fil-

ter in household trash, in sewers or
onto the ground. Call your dealer or

a service station for information

concerning recycling or disposal.

NOTICE

Remember that battery and ignition
cables carry high currents or volt-

ages. Be careful of accidentally

causing a short circuit.

Add only demineralized or distilled

water to fill the radiator. And if you

spill some of the coolant, be sure
to wash off with water to prevent it

from damaging the parts or paint.

Do not allow dirt or anything else

to fall through the spark plugholes.

Use only spark plugs of the speci-
fied type. Using other types will

cause engine damage, loss of per-
formance or radio noise.

Do not reuse platinum

−

tipped spark

plugs by cleaning or regapping.

Do not overfill automatic transmis-
sion fluid, or the transmission

could be damaged.

Do not drive with the air cleaner
filter removed, or excessive engine

wear could result. Also backfiring

could cause a fire in the engine
compartment.

Be careful not to scratch the glass
surface with the wiper frame.

When closing the engine hood,

check to see that you have not for-
gotten any tools, rags, etc.

Positioning the jack

Front

Rear

Summary of Contents for 2001 Camry













































































































































































































































































Search results

Summary of Contents for 2001 Camry

Reviews:

Related manuals for 2001 Camry

Brands by name

Popular brands

Toyota 2001 Camry, Owner'S Manual

Search results

Summary of Contents for 2001 Camry

Reviews:

Related manuals for 2001 Camry

Brands by name

Popular brands