Toyota 2001 Camry Page 49 Owner'S Manual Download

Page: 49 / 268

’01Camry_U (L/O 0009)

2001 MY CAMRY (OM33528U)

This indicator comes on when the igni-

tion key is turned to the “ACC” or
“ON” position. It goes off after about

6 seconds. This means the front seat

belt pretensioners are operating proper-
ly.

This warning light system monitors the
airbag sensor assembly, front airbag sen-

sors, side airbag sensors, front seat belt

pretensioner assemblies, inflators, warning
light, interconnecting wiring and power

sources. (For details, see “Service remind-

er indicators and warning buzzers” in Sec-
tion 1

−

5.)

The front seat belt pretensioner system

mainly consists of the following compo-
nents and their locations are shown in the

illustration.

1. Front airbag sensors
2. SRS warning light
3. Front seat belt pretensioner assemblies
4. Airbag sensor assembly

The front seat belt pretensioners are con-

trolled by the airbag sensor assembly. The

airbag sensor assembly consists of a saf-
ing sensor and airbag sensor.

When the front seat belt pretensioners are

activated, an operating noise may be

heard and a small amount of smoke

−

gas may be released. This gas is harm-

less and does not indicate that a fire is

occurring.
Once the front seat belt pretensioners

have been activated, the seat belt retrac-

tors remain locked.

CAUTION

Do not modify, remove, strike or open
the front seat belt pretensioner as-

semblies, airbag sensor or surround-

ing area or wiring. Doing any of
these may cause sudden operation of

the front seat belt pretensioners or

disable the system, which could re-
sult in death or serious injury.
Failure to follow these instructions

can result in death or serious inju-
ries.

Summary of Contents for 2001 Camry













































































































































































































































































Search results

Summary of Contents for 2001 Camry

Reviews:

Related manuals for 2001 Camry

Brands by name

Popular brands

Toyota 2001 Camry, Owner'S Manual

Search results

Summary of Contents for 2001 Camry

Reviews:

Related manuals for 2001 Camry

Brands by name

Popular brands