Toyota 2001 Camry Page 104 Owner'S Manual Download

Page: 104 / 268

’01Camry_U (L/O 0009)

2001 MY CAMRY (OM33528U)

CAUTION

Always keep your foot on the brake
pedal while stopped with the engine

running. This prevents the vehicle

from creeping.

NOTICE

Do not hold the vehicle on an up-
grade with the accelerator pedal. It

can cause the transmission to over-

heat. Always use the brake pedal or
parking brake.

(i) Rocking your vehicle if stuck

CAUTION

If your vehicle becomes stuck in
snow, mud, sand, etc., then you may

attempt to rock your vehicle free by

moving it forward and backward. Do
not attempt this procedure if people

or objects are anywhere near the ve-

hicle. During the rocking operation
the vehicle may suddenly move for-

ward or backward as it becomes un-

stuck, causing injury or damage to
nearby people or objects.

NOTICE

If you rock your vehicle, observe the
following precautions to prevent dam-

age to the transmission and other

parts.

Do not depress the accelerator ped-

al while shifting the selector lever

or before the transmission is com-
pletely shifted to forward or reverse

gear.

Do not race the engine and avoid

spinning the wheels.

If your vehicle remains stuck after
rocking the vehicle several times,

consider other ways such as tow-

ing.

(j) If you cannot shift the selector le-

ver out of “P” position

If you cannot shift the selector lever from

“P” position even though the brake pedal
is depressed, use the shift lock override

button. For instructions, see “If you cannot
shift automatic transmission selector lever”

in Section 4.

Summary of Contents for 2001 Camry













































































































































































































































































Search results

Summary of Contents for 2001 Camry

Reviews:

Related manuals for 2001 Camry

Brands by name

Popular brands

Toyota 2001 Camry, Owner'S Manual

Search results

Summary of Contents for 2001 Camry

Reviews:

Related manuals for 2001 Camry

Brands by name

Popular brands