Toyota 2001 Camry Owner'S Manual Download Page 40

Page: 40 / 268

’01Camry_U (L/O 0009)

2001 MY CAMRY (OM33528U)

3. SEAT CUSHION HEIGHT ADJUSTING

KNOB

Turn the knob either way.

4. SEAT LUMBAR SUPPORT

ADJUSTING LEVER

Pull the lever upward or downward.

1. SEAT POSITION AND SEAT CUSHION

HEIGHT ADJUSTING SWITCH

Move the control switch in the desired
direction.

Releasing the switch will stop the seat at
that position.
Do not place anything under the front

seats. It might interfere with the seat

−

lock

mechanism.

2. SEATBACK ANGLE ADJUSTING

SWITCH

Move the control switch in the desired

direction.

Releasing the switch will stop the seat-

back at that position.

—Adjusting front seats

(power seat)

Summary of Contents for 2001 Camry













































































































































































































































































Search results

Summary of Contents for 2001 Camry

Reviews:

Toyota 2001 Camry, Owner'S Manual, Page: 40 / 268

Search results

Summary of Contents for 2001 Camry

Reviews: