Toyota 2001 Camry Page 76 Owner'S Manual Download

Page: 76 / 268

’01Camry_U (L/O 0009)

2001 MY CAMRY (OM33528U)

Anchor brackets

Use the anchor bracket on the package

tray behind the rear seat to attach the top
strap.
Anchor brackets are installed for each
rear seating position.

TO USE THE ANCHOR BRACKET:

1. Outside anchor brackets only—

Remove the head restraint.

2. Securely fasten the child restraint

system with the seat belt.
Latch the hook onto the anchor

bracket and tighten the top strap.

For instructions to install the child re-

straint system, see ”Child restraint” in this

section.

CAUTION

Make sure the top strap is securely
latched, and check that the child re-

straint system is secure by pushing

and pulling it in different directions.

Summary of Contents for 2001 Camry













































































































































































































































































Search results

Summary of Contents for 2001 Camry

Reviews:

Related manuals for 2001 Camry

Brands by name

Popular brands

Toyota 2001 Camry, Owner'S Manual

Search results

Summary of Contents for 2001 Camry

Reviews:

Related manuals for 2001 Camry

Brands by name

Popular brands