Toyota 2001 Camry Owner'S Manual Download Page 97

Page: 97 / 268

’01Camry_U (L/O 0009)

2001 MY CAMRY (OM33528U)

(g) “ABS” Warning Light

The light comes on when the ignition key

is turned to the “ON” position. If the anti

−

lock brake system works properly, the

light turns off after a few seconds. There-

after, if the system malfunctions, the light
comes on again.
When the “ABS” warning light is on (and
the brake system warning light is off), the

anti

−

lock brake system and the traction

control system do not operate, but the
brake system still operates conventionally.
When the “ABS” warning light is on (and

the brake system warning light is off), the
anti

−

lock brake system does not operate

so that the wheels could lock up during

a sudden braking or braking on slippery
road surfaces.

If either of the following conditions

occurs, this indicates a malfunction

somewhere in the parts monitored by
the warning light system. Contact your

Toyota dealer as soon as possible to

service the vehicle.

The light does not come on when the

ignition key is turned to the “ON” posi-

tion, or remains on.

The light comes on while you are driv-

ing.

A warning light turning on briefly during

operation does not indicate a problem.

(h) Open Door Warning Light

This light remains on until all the doors

are completely closed.

(i) Rear Light Failure Warning Light

If this light comes on when the headlight

switch is turned on (at the first or second

clickstop), it indicates that one or more of
the tail lights are burned out.
If it comes on when the brake pedal is

depressed, one or more stop lights are
burned out.
Have defective bulbs replaced as soon as
possible.

(j) SRS Warning Light
This light will come on when the igni-

tion key is turned to the “ACC” or
“ON” position. After about 6 seconds,

the light will go off. This means the

systems of the airbag and front seat
belt pretensioner are operating properly.

This warning light system monitors the
airbag sensor assembly, front airbag sen-

sors, side airbag sensors, front seat belt

pretensioner assemblies, inflators, warning
light, interconnecting wiring and power

sources.
If either of the following conditions occurs,
this indicates a malfunction somewhere in

the parts monitored by the warning light

system. Contact your Toyota dealer as
soon as possible to service the vehicle.

The light does not come on when the
ignition key is turned to the “ACC” or

“ON” position or remains on.

The light comes on or flashes while

driving.

Summary of Contents for 2001 Camry













































































































































































































































































Search results

Summary of Contents for 2001 Camry

Reviews:

Toyota 2001 Camry, Owner'S Manual, Page: 97 / 268

Search results

Summary of Contents for 2001 Camry

Reviews: