Toyota 2001 Camry Page 208 Owner'S Manual Download

Page: 208 / 268

’01Camry_U (L/O 0009)

200

2001 MY CAMRY (OM33528U)

—Emergency towing

If towing is necessary, we recommend

you to have it done by your Toyota
dealer or a commercial tow truck ser-

vice.
If towing service is not available in an

emergency, your vehicle may be tempo-

rarily towed by a cable or chain se-
cured to one of the emergency towing

eyelets under the vehicle. Use extreme

caution when towing vehicles.

NOTICE

Only use specified towing eyelet;
otherwise your vehicle may be

damaged.

A driver must be in the vehicle to steer

it and operate the brakes.
Towing in this manner may be done only
on hard

−

surfaced roads for a short dis-

tance and at low speeds. Also, the

wheels, axles, drive train,steering and
brakes must all be in good condition.

CAUTION

Use extreme caution when towing ve-
hicles. Avoid sudden starts or erratic

driving maneuvers which would place

excessive stress on the emergency
towing eyelets and towing cable or

chain. The eyelets and towing cable

or chain may break and cause serious
injury or damage.

NOTICE

Use only a cable or chain specifically
intended for use in towing vehicles.

Securely fasten the cable or chain to

the towing eyelets provided.

Before towing, release the parking brake

and put the transmission in neutral (manu-

al) or “N” (automatic). The key must be
in “ACC” (engine off) or “ON” (engine run-

ning).

CAUTION

If the engine is not running, the pow-
er assist for the brakes and steering

will not work so steering and braking

will be much harder than usual.

Summary of Contents for 2001 Camry













































































































































































































































































Search results

Summary of Contents for 2001 Camry

Reviews:

Related manuals for 2001 Camry

Brands by name

Popular brands

Toyota 2001 Camry, Owner'S Manual

Search results

Summary of Contents for 2001 Camry

Reviews:

Related manuals for 2001 Camry

Brands by name

Popular brands