Toyota 2001 Camry Page 214 Owner'S Manual Download

Page: 214 / 268

’01Camry_U (L/O 0009)

206

2001 MY CAMRY (OM33528U)

Road tar: Remove with turpentine or

cleaners that are marked safe for painted

surfaces.

NOTICE

Do not use organic substances (gaso-
line, kerosene, benzine or strong sol-

vents), which may be toxic or cause

damage.

3. Rinse thoroughly—dried soap can

cause streaking. In hot weather you

may need to rinse each section right

after you wash it.

4. To prevent water spots, dry the vehicle

using a clean soft cotton towel. Do not

rub or press hard—you might scratch
the paint.

Automatic car wash

Your vehicle may be washed in an auto-

matic car wash, but remember that the

paint can be scratched by some type of
brushes, unfiltered washing water, or the

washing process itself. Scratching reduces

paint durability and gloss, especially on
darker colors. The manager of the car

wash should be able to advise you wheth-
er the process is safe for the paint on

your vehicle.

Waxing your Toyota
Polishing and waxing is recommended

to maintain the original beauty of your
Toyota’s finish.

Once a month or if the vehicle surface
does not repel water well, apply wax.

1. Always wash and dry the vehicle be-

fore you begin waxing, even if you are
using a combined cleaner and wax.

2. Use a good quality polish and wax. If

the finish has become extremely weath-

ered, use a car

−

cleaning polish, fol-

lowed by a separate wax. Carefully fol-
low the manufacturer’s instructions and

precautions. Be sure to polish and wax

the chrome trim as well as the paint.

3. Wax the vehicle again when water

does not bead but remains on the sur-
face in large patches.

NOTICE

Always remove the plastic bumpers if
your vehicle is re

−

painted and placed

in a high heat paint waxing booth.

High temperatures could damage the
bumpers.

Cleaning the interior

CAUTION

Vehicles with side airbags:
Be careful not to splash water or

spill liquid on the floor. This may

prevent the side airbags from acti-
vating correctly, resulting in serious

injury.

Do not wash the vehicle floor with

water, or allow water to get onto

the floor when cleaning the vehicle
interior or exterior. Water may get

into audio components or other

electrical components above or un-
der the floor carpet (or mat) and

cause a malfunction; and it may

cause body corrosion.

Vinyl interior
The vinyl upholstery may be easily

cleaned with a mild soap or detergent

and water.

Summary of Contents for 2001 Camry













































































































































































































































































Search results

Summary of Contents for 2001 Camry

Reviews:

Related manuals for 2001 Camry

Brands by name

Popular brands

Toyota 2001 Camry, Owner'S Manual

Search results

Summary of Contents for 2001 Camry

Reviews:

Related manuals for 2001 Camry

Brands by name

Popular brands