Toyota 2001 Camry Page 60 Owner'S Manual Download

Page: 60 / 268

’01Camry_U (L/O 0009)

2001 MY CAMRY (OM33528U)

Collision from the rear

Collision from the front

Vehicle rollover

The SRS side airbags are not designed

to inflate if the vehicle is involved in a
front or rear collision, if it rolls over,

or if it is involved in a low

−

speed side

collision.

The SRS side airbag system consists

mainly of the following components, and
their locations are shown in the illustra-

tion.

1. SRS warning light
2. Side airbag modules

(airbag and inflator)

3. Side airbag sensors
4. Airbag sensor assembly

The SRS side airbag system is controlled

by the airbag sensor assembly. The airbag
sensor assembly consists of a safing sen-

sor and airbag sensor.

In a severe side impact, the side airbag

sensor triggers the side airbag inflators.

Then a chemical reaction in the inflators
quickly fills the airbags with non

−

toxic gas

to help restrain the lateral motion of the

occupants.
When the airbags inflate, they produce a

fairly loud noise and release some smoke

and residue along with non

−

toxic gas. This

does not indicate a fire. This gas is nor-

mally harmless; however, for those who

have delicate skin, it may cause a minor
skin irritation. Be sure to wash off any

residue as soon as possible to prevent

any potential skin irritation.
Deployment of the airbags happen in a

fraction of a second, so the airbags must
inflate with considerable force. While the

system is designed to reduce serious inju-

ries, it may also cause minor burns or
abrasions and swelling.
Front seats may be hot for several min-
utes, but the airbags themselves will not

be hot. The airbags are designed to inflate

only once.

Summary of Contents for 2001 Camry













































































































































































































































































Search results

Summary of Contents for 2001 Camry

Reviews:

Related manuals for 2001 Camry

Brands by name

Popular brands

Toyota 2001 Camry, Owner'S Manual

Search results

Summary of Contents for 2001 Camry

Reviews:

Related manuals for 2001 Camry

Brands by name

Popular brands