Toyota 2001 Camry Page 18 Owner'S Manual Download

Page: 18 / 268

’01Camry_U (L/O 0009)

2001 MY CAMRY (OM33528U)

Do not bend the key grip.

Do not cover the key grip with any
material that cuts off electromagnet-

ic waves.

Do not knock the key hard against
other objects.

Do not leave the key exposed to
high temperatures for a long period,

such as on the dashboard and hood

under the direct sunlight.

Do not put the key in water or

wash it in an ultrasonic washer.

Do not use the key with electromag-

netic materials.

KEY NUMBER PLATE
Your key number is shown on the plate.
Keep the plate in a safe place such as

your wallet, not in the vehicle.

If you should lose your keys or if you

need additional keys, duplicates can be

made by a Toyota dealer using the key
number.
We recommend you to write down the key
number and keep it in safe place.

Summary of Contents for 2001 Camry













































































































































































































































































Search results

Summary of Contents for 2001 Camry

Reviews:

Related manuals for 2001 Camry

Brands by name

Popular brands

Toyota 2001 Camry, Owner'S Manual

Search results

Summary of Contents for 2001 Camry

Reviews:

Related manuals for 2001 Camry

Brands by name

Popular brands