Toyota 2001 Camry Page 41 Owner'S Manual Download

Page: 41 / 268

’01Camry_U (L/O 0009)

2001 MY CAMRY (OM33528U)

CAUTION

To reduce the risk of sliding under
the lap belt during a collision, avoid

reclining the seatback any more than

needed. The seat belts provide maxi-
mum protection in a frontal or rear

collision when the driver and the pas-

senger are sitting up straight and
well back in the seats. If you are

reclined, the lap belt may slide past

your hips and apply restraint forces
directly to the abdomen. Therefore, in

the event of a formal collision, the

risk of personal injury may increase
with increasing recline of the seat-

back.

3. SEAT LUMBAR SUPPORT

ADJUSTING LEVER

Pull the lever upward or downward.

Fold

−

down rear seat

1. Pull up the seatback security lock

lever 1 to the unlock position.

2. Pull up the lock release button 2.
3. Fold down the seatback.

Each seatback may be folded separately.

This will enlarge the trunk as far as the

seatbacks. See “Luggage stowage precau-
tions” in Section 2 for precautions in load-

ing luggage.

NOTICE

Make sure the luggage loaded in the
enlarged trunk will not damage the

webbing of the rear center seat belt

when the left seatback is folded
down.

Summary of Contents for 2001 Camry













































































































































































































































































Search results

Summary of Contents for 2001 Camry

Reviews:

Related manuals for 2001 Camry

Brands by name

Popular brands

Toyota 2001 Camry, Owner'S Manual

Search results

Summary of Contents for 2001 Camry

Reviews:

Related manuals for 2001 Camry

Brands by name

Popular brands