Toshiba TOSVERT VF-MB1, Instruction Manual

Page: 58 / 350

E6581697
C-7
3
3.2.2 How to set the frequency
[Example of

setting procedure]: Setting the frequency by the terminal VIA
Panel operation LED display Operation

Displays the output frequency (operation stopped).
(When standard monitor display selection

=

 [output frequency])

Displays the first basic parameter [History (  )].

Turn the setting dial, and select "  ".

Press the center of the setting dial to read the parameter value.
(Standard default:

).

Turn the setting dial to change the parameter value to  (terminal block
VIA).



The parameter value is written.

and the parameter value are
displayed alternately several times.
* Pressing the MODE key twice returns the display to standard monitor mode (displaying output frequency).
(1) Setting using the keypad (

=

or

)
: Moves the frequency up : Moves the frequency down

Example of operating from the panel (

=

: press in center to save)
Panel operation LED display Operation

Displays the output frequency.
(When standard monitor display selection

=

[output frequency])

Set the output frequency. (The frequency will not be saved if the
power is turned off in this state.)



Save the output frequency.

and the frequency are displayed
alternately.

Example of operating from the panel (

=

: save even if power is off)
Panel operation LED display Operation

Display the output frequency.
(When standard monitor display selection is set as  =  
[output frequency])
 Set the output frequency.
-

The frequency will be saved even if the power is turned off in this
state.
MODE