Toshiba MMC-UP0151HP-E, Service Manual

Page: 122 / 295

2
3 1 4
SET
TIME
TIMER SET
TEST
FILTER
RESET
TEMP.
CL
FAN
SAVE
SWING/FIX
VENT
MODE
ON / OFF
UNIT LOUVER
Monitoring function of wired remote controller
<RBC-AMT >
Content
Enter the service monitoring mode using the remote controller to check the sensor temperature or operation status of
the remote controller, indoor unit, and outdoor unit.
1
Push and hold the , and for 4 seconds or longer to enter the service monitoring
mode.
The service monitor lights up. The CODE No.
00 00
00 00 00
appears at first.
2
Push the
TEMP.
button to change to CODE No. of the item to monitor. Refer to the next page
for CODE No.
3
Push the left part of the
UNIT LOUVER
button (left side of the button) to change to the item to
monitor. Monitor the sensor temperature or operation status of the indoor unit and outdoor
unit in the refrigerant line.
4
Push the button to return the display to normal.
<RBC-ASCU11- >
1,2
4
2, 4 5 3 1
"Monitoring function"
display
Indoor unit
number
Data
1
Push the [menu] button for over 10 seconds. “Monitoring function” is displayed on a screen.
2
Every pushing [ or ] buttons, the indoor unit numbers in group control are displayed
successively.
3
Push the [OFF timer] button to confirm the selected indoor unit.
4
Every pushing [ or ] buttons, CODE No. of the item is changed successively.
5
After you have finished checking, push the [ON/OFF] button, return to normal mode.
- 122 -