Toshiba e-STUDIO350, Service Manual, Page: 14 / 286

e-STUDIO350/450 SPECIFICATIONS 1 - 6 November 2003 © TOSHIBA TEC
1
1.3 Options
Platen Cover KA-3511 PC/PC-C
Reversing Automatic Document Feeder (RADF) MR-3015
Drawer Module MY-1021 /-C
Paper Feed Pedestal (PFP) KD-1011 /-C
Large capacity feeder (LCF) KD-1012 A4/LT/A4-C
Finisher (Hanging type) MJ-1022 /-C
Finisher (Console type) MJ-1023 /-C
Finisher (Console saddle stitcher type) MJ-1024 /-C
Hole Punch Unit MJ-6004 N/E/F/S *1
Staple Cartridge STAPLE-1600 (for MJ-1022)
STAPLE-2000 (for MJ-1023/1024)
STAPLE-600 (for MJ-1024)
Bridge Kit KN-3520 /-C
Job Separator MJ-5004 /-C
Offset Tray MJ-5005 /-C
Key Counter MU-8, MU-10
Work Tray KK-3511
Damp Heater MF-3520 U/E
Fax Board GD-1150 NA/AU/EU/TW/C/AS
2nd Line for Fax Board GD-1160 NA/EU/TW/C
Wireless LAN Adapter GN-1010
PCI Slot GO-1030
Scrambler Board GP-1030
Printer Kit GM-1010
Printer/Scanner Kit GM-2010
Scanner upgrade Kit GM-3010
Desk MH-1700
* 1) N : North America E : Europe F : France S : Sweden
Notes:
1. The bridge unit (KN-3511) is necessary for installation of the finisher (MJ-1022, MJ-1023 or MJ-
1024).
2. The finisher (MJ-1023 or MJ-1024) is necessary for installation of the hole punch unit (MJ-
6004N/E/F/S).
3. The PCI slot (GO-1030) is necessary for installation of the scrambler board (GP-1030).