Toshiba e-STUDIO350, Service Manual, Page: 128 / 286

e-STUDIO350/450 SCANNER 6 - 20 November 2003 © TOSHIBA TEC
6
(6) Rotate the carriage-1 in the direction shown
in the figure at right, not to touch the mirror.
Then take off the carriage-1.
Note:
When installing the carriage-1, fix the bracket
temporarily at the position (A). Then move it to
the direction (B) slowly, push it to the end of
frame and fix at this position with the screws.
(Refer to 3.7.1 in the Service Handbook.)
[I] INV board
(1) Take off the carriage-1 ( Chapter 6.7 [G]).
(2) Disconnect 2 connectors.
(3) Remove 2 screws and take off the INV board.
[H] Mirror-1
(1) Take off the carriage-1 ( Chapter 6.7 [G]).
Note:
When replacing the mirror-1, replace the
carriage-1 together with mirror-1.
Mirror-1 should not be removed.
(B)
(A)
(A)
Fig. 6-716
Fig. 6-717
Fig. 6-718