8
© 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved
e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
ERROR CODE and TROUBLESHOOTING
8 - 11
E722
RADF jam
Jam not reaching the original exit/reverse
sensor (during scanning): The original
which passed the read sensor does not
reach the original exit/reverse sensor when
it is transported from the scanning section
to exit section.
E724
Stop jam at the original registration sensor:
The trailing edge of the original does not
pass the original registration sensor after its
leading edge has reached this sensor.
E725
Stop jam at the read sensor: The trailing
edge of the original does not pass the read
sensor after its leading edge has reached
this sensor.
E726
Transport/exit signal reception jam: RADF
receives the transport/exit reception signal
from the equipment when no original is at
the exposure waiting position.
E727
Jam not reaching the original reading end
sensor
E729
Stop jam at the original reading end sensor
E731
Stop jam at the original exit/reverse sensor:
The trailing edge of the original does not
pass the original exit/reverse sensor after
its leading edge has reached this sensor.
E744
Stop jam at the original exit/reverse sensor
E745
Jam not reaching the original exit reverse
sensor
E746
Exit/reverse sensor paper remaining jam
E762
Registration sensor paper remaining jam
E770
Original width detection sensor-1 paper
remaining jam
E771
Original width detection sensor-2 paper
remaining jam
E772
Original width detection sensor-3 paper
remaining jam
E773
Intermediate transport sensor paper
remaining jam
E774
Reading start sensor paper remaining jam
E775
Reading end sensor paper remaining jam
E777
Exit sensor paper remaining jam
E860
Original jam access cover open jam
E870
RADF open jam
E871
Cover open jam in the read ready status
E890
ADF time out jam
Error code
Classification
Contents
Troubleshooting